Loading ...
Loading ...
Loading ...
- 30 -- 29 -
1.2 Long press the <Zm/CH> button to set
channel, group, mode and parameters (refers
to the contents of “Setting the Flash Trigger”).
1.3 Turn on the camera flash, press the
wireless setting button and the
wireless icon and <SLAVE> slave unit icon
will be displayed on the LCD panel. Press the
<CH> button to set the same channel to the
flash trigger, and press the <Gr> button to set
the same group to the flash trigger (Note: please refer to the relevant instruction manual
when setting the camera flashes of other models).
1.4 Press the camera shutter to trigger and the status lamp of the flash trigger
turns red synchronously.
Using the Flash Trigger
2. As a Wireless Outdoor Flash Trigger
Take AD600B as an example:
2.1 Turn off the camera and mount the
transmitter on camera hotshoe. Then,
power on the flash trigger and the camera.
2.2 Long press the <Zm/CH> button to set
channel, group, mode and parameters
(refers to the contents of “Setting the Flash
Trigger”).
2.3 Power on the outdoor flash and press the
wireless setting button and the wireless icon will be displayed on the
LCD panel. Long press the <GR/CH> button to set the same channel to the
Using the Flash Trigger
3. As a Wireless Original Flash Trigger
Take HVL-F45RM as an example:
3.1 Turn off the camera and mount the transmitter
on camera hotshoe. Then, power on the flash
trigger and the camera.
3.2 Long press the <Zm/CH> button to set channel,
group, mode and parameters (refers to the
contents of “Setting the Flash Trigger”).
3.3 Attach the original flash to the X1R-S receiver.
Press the <CH> button on the receiver to set
the same channel to the flash trigger, and press
the <Gr> button to set the same group to the
flash trigger (Note: please refer to the relevant
instruction manual when setting the original
camera flashes).
3.4 Press the camera shutter to trigger. And the
status lamp of the camera flash and the flash
trigger both turn red synchronously.
Note: Sony original speedlights shall be set to TTL mode regardless of XProS's mode.
< >
< >
< >
< >
flash trigger, and short press the < GR/CH> button to set the same group to the
flash trigger (Note: please refer to the relevant instruction manual when setting
the oudoor flashes of other models).
2.4 Press the camera shutter to trigger and the status lamp of the flash trigger turns
red synchronously.
M
A
CH19
1/128
Zoom
24
mm
SLAVE
Zm/C.Fn Gr CH
±
M
Loading ...
Loading ...
Loading ...