Loading ...
Loading ...
Loading ...
English | 35
Bosch Power Tools 1 609 92A 1LE | (24.10.16)
Tack Paper (see figures C1–C2)
– Insert a suitable staple strip 9.
– Click the lugs of the paper tacker 11 one by one into the side slots of
the power tool.
– Insert the stack of paper into the paper tacker 11 and position the tack-
er head over the paper surface to be tacked.
– Firmly push the power tool down until the tacker head 1 is pushed in a
few millimetres.
– Keep up the contact pressure and briefly press the trigger 5.
Once the staple has been completely driven in, release the trigger 5
and lift the tacker head 1 from the stack of paper.
Note: To load the magazine, you have to dismount the paper tacker from
the cordless tacker.
Tack Booklets (seefiguresD1–D3)
– Before the first use, you must put the two halves of the booklet maker
12 together.
The booklet maker can no longer be dismounted.
– Insert a suitable staple strip 9 .
– Fold the top sheet (cover) of the stack of paper to be tacked in half, in
order to obtain an indication line for the staple position.
–Open the brackets 13 of the booklet maker 12 and place the paper
stack in the middle, with the cover facing upwards.
– Fold the brackets 13 downwards.
Align the paper stack in such a way that the indication line is visible
through the slots of the brackets.
– Firmly place the tacker head 1 against one of the slots first, until it is
pushed in a few millimetres.
– Keep up the contact pressure and briefly press the trigger 5.
Once the staple has been completely driven in, release the trigger 5
and lift the tacker head 1 from the bracket.
– Repeat the steps for the second slot.
– Lift back the brackets 13, remove the tacked paper stack and fold it in
half.
OBJ_BUCH-1433-006.book Page 35 Monday, October 24, 2016 12:52 PM
Loading ...
Loading ...
Loading ...