Loading ...
Loading ...
Loading ...
– 2
– This blower is meant for drying carpets/
carpet floors that have been wet-
cleaned.
– This device is exclusively meant for in-
dustrial and commercial use.
Any use extending beyond this is not con-
sidered as proper use. The manufacturer is
not liable for any losses resulting from this;
the user alone bears the risk for this.
1 Transport handle
2 Fastener for transport handle
3 Power cord
4 Bearing wheel
5 Clamping part with cross-handles
6 Blower
7 Handle
8 Power switch
Install the transport handle.
Note: When installing the appliance, en-
sure that the blower grid is free and does
not have any objects in front of it.
Open doors and windows as wide as
possible to improve the ventilation.
Place the device on the carpet to be
dried.
Lift the carpet.
Push the carpet under the clamping
part of the device and fasten it by turn-
ing the cross-handles.
Plug in the mains plug.
Turn on the appliance.
Perform the drying process.
Turn off the appliance.
Pull out the mains plug.
Proper use
Device elements
Start up
1
2
3
4
5
8
6
7
Operation
Drying the carpet from the top
Drying the carpet from below
Power switch
OFF Off
3 Maximum output
2 Medium output
1 Minimum output
Turning on the Appliance
Drying
Turn off the appliance
OFF
1 3
2
6 EN
Loading ...
Loading ...
Loading ...