Loading ...
Loading ...
Loading ...
15ninjakitchen.co.uk
14
ninjakitchen. co.uk
1 Plug in motor base and place on a clean,
dry, smooth, level surface such as a
worktop or table.
2 Lower the Jug onto the motor base. The
handle should be aligned slightly to the
right and the jug should be oriented so
the LOCK symbols are visible on the
motor base. Rotate the jug clockwise
until it clicks into place.
POWERMIX
BLEND
CRUSH
MIX
PUREE
CHOP
USING THE JUG & DOUGH BLADE ASSEMBLY
3 Exercising care, grasp the Dough Blade
Assembly by the top of the shaft and
place it onto the drive gear inside the jug.
Note that the blade assembly
will fit loosely onto the drive gear.
IMPORTANT: Review all warnings on
pages 4–7 before proceeding.
POWERMIX
BLEND
CRUSH
MIX
PUREE
CHOP
IMPORTANT:
As a safety feature, when
the unit is powered on, if the jug and
lid are not properly installed, the timer
will display “- -” and the motor will be
disabled. If this happens, repeat step 5
on the following page. When the jug and
lid are properly installed and the unit is
powered on, the program button LEDs
will illuminate, indicating the appliance is
ready to use.
NOTE: Auto-iQ® programs have pauses and
changes in speed throughout the cycle.
NOTE: DO NOT add ingredients before
completing installation of the Dough
Blade Assembly.
NOTE:
If the Dough Blade Assembly is
not fully seated, you will not be able to
install and lock the lid.
NOTE:
The jug lid handle will not fold
down unless it is attached to the jug.
4 Add ingredients to the jug. DO NOT add
ingredients past the DOUGH MAX or
COOKIE MAX line on the jug.
POWERMIX
BLEND
CRUSH
MIX
PUREE
CHOP
POWERMIX
BLEND
CRUSH
MIX
PUREE
CHOP
5 Place the lid on the jug. Press down on the
handle until it clicks into place. Once the lid
is locked in place, press the Power button
to turn unit on. The available program
buttons will illuminate and the unit will be
ready for use.
6 Press IQ/Manual. Use the dial to select
speeds 1 or 2, then press START/STOP.
Once the ingredients have reached
your desired consistency, press
START/STOP and wait for the unit
to come to a complete stop.
POWERMIX
BLEND
CRUSH
MIX
PUREE
CHOP
7 Remove the jug from the motor base
by turning it anti-clockwise and then
lifting up.
8 Remove the lid and Dough Blade Assembly
before removing contents. To remove the
lid, press the RELEASE button and lift the
handle. To remove the blade assembly,
carefully grasp it by the top of the shaft
and pull straight up. The jug can then be
emptied.
9 Turn the unit o by pressing the Power
button. Unplug the unit when finished.
Refer to the Care & Maintenance section
for cleaning and storage instructions.
IMPORTANT:
Only use speeds 1 or 2
when using the Dough Blade Assembly.
COOKIE MAX
DOUGH MAX
Loading ...
Loading ...
Loading ...