Loading ...
Loading ...
Loading ...
5
REMOTE CONTROL
1. Press 1 to power electric fireplace ON/OFF.
2. Press 2 to adjust the flame color. The flame color can be adjusted according to the touch
switch.
3. Press 3 to decrease the flame’s brightness.
4. Press 4 to increase the flame’s brightness.
5. Press 5 for heater settings. Press one time for LOW heat, and press twice for the HIGH
heater. Press a third time to turn off the heater.
6. Press 6 to adjust the timer. The timer is programmable for 1/2 hour to 7.5 hours. The heater
can be programmed in 1/2 hour increments. The heater will automatically turn off after the
desired programmed time has expired.
* Use a CR025 3V battery for the remote control.
GLASS INSTRUCTIONS
1. Under no circumstances should this product be operated with a broken or chipped glass
panel.
2. Do not strike or slam the glass.
3. Do not use abrasive cleaners to clean the glass. Make sure the glass is cool to the touch.
4. This product uses tempered glass. Replacement of the glass supplied by the manufacturer
should be done by qualified/authorized personnel only.
MAINTENANCE OF MOTORS
1. Always disconnect the unit from the main power supply and allow it to cool before any
servicing operation.
2. The motors used on the fan heater and flame blower are pre-lubricated for extended bearing
life and require no further lubrication. However, periodic cleaning/vacuuming of the unit
around the air intake and exhaust, as well as the fan heater, is recommended. For heavy
blows alternating cold and warm air, check the fan for free movement and for debris
restricting air flow. If the fan does not move freely, the unit needs to be turned off and the fan
replaced in order to prevent further damage of the unit.
Loading ...
Loading ...
Loading ...