Loading ...
Loading ...
Loading ...
When the SET/– switch is pushed under the
following conditions, the system cannot be
set and the ICC indicators will blink for ap-
proximately 2 seconds:
• When traveling below 20 mph (32 km/h)
and a vehicle ahead is not detected
• When the shift lever is not in the D (Drive)
or Manual mode
• When the parking brake is applied
• When the brakes are operated by the
driver
When the SET/– switch is pushed under the
following conditions, the system cannot be
set.
A warning chime will sound and a message
will pop up:
• When the VDC system is off (To use the
ICC system, turn on the VDC system. Push
the CRUISE ON/OFF switch to turn off the
ICC system and reset the CRUISE ON/OFF
switch by pushing the CRUISE ON/OFF
switch again.)
For additional information about the
VDC system, see “Vehicle Dynamic Con-
trol (VDC) system” (P. 5-122).
• When VDC is operating
• When a wheel is slipping (To use the ICC
system, make sure the wheels are no lon-
ger slipping.)
䊊
1
System set display with vehicle ahead
䊊
2
System set display without vehicle
ahead
The driver sets the desired vehicle speed
based on the road conditions. The ICC sys-
tem maintains the set vehicle speed, simi-
lar to standard cruise control, as long as no
vehicle is detected in the lane ahead. The
ICC system displays the set speed.
LSD3395 LSD2288
5-66 Starting and driving
Loading ...
Loading ...
Loading ...