Loading ...
Loading ...
Loading ...
Operating by Remote Control
Fig 6
1. Plug in your electric fireplace.
Important! The Main ON/OFF power switch on the fireplace must be in the
ON position.
2. When operating the heater with the remote control, it must be pointed at
the logset inside the electric stove and the red light must blink each time you
press a function button. The blinking red light confirms the remote control is
working.
Note:Make sure your batteries are installed correctly in your remote
control.
3. “ “button of the remote control at the top left is the main ON/OFF
power button.
4. “ ”buttons is on/off button; to control the red and blue lamp of
flame and ember bed.
5. The Red buttons control the red brightness of
flame and ember bed.
To increase the brightness, press and release the button. Each
time you press this button the brightness will increase by a small amount,
until the maximum is reached.
To decrease the brightness, press and release the button. Each
time you press this button the brightness will decrease by small amount, until
the minimum brightness is reached.
6. The BLUE buttons control the blue brightness of
flame and ember bed.
To increase the brightness, press and release the button. Each
time you press this button the brightness will increase by a small amount,
until the maximum is reached.
To decrease the brightness, press and release the button. Each
time you press this button the brightness will decrease by small amount, until
the minimum brightness is reached.
7. Button: To activate the heater,press the heater button,
Heater work at the high ; press the Heater Button once,to turn off the heater.
.
Loading ...