Loading ...
Loading ...
outlet. Check to see the unit turns on and produces function.
2. This heater is for use on 120 volts. The cord has a plug as
shown at A in below Figure. An adapter as shown at C is
available for connecting three-blade grounding-type plugs to
two-slot receptacles. The green grounding lug extending from
the adapter must be connected to a permanent ground such as a
properly grounded outlet box. The adapter should not be used if
a three-slot grounded receptacle is available.
Parts and hardware
Part
Quantity
Remote Control
1
Manual
1
Fixing Hanger(In the back of
the fire)
1
Fixing Bracket
1
Crystals
1or 2(80-2000A-54)
Screw ST4*8
1
Screw ST4*40
5
Plastic expansion
5
Tool required
Magnetic Phillips Screw Driver
WARNING: Do not operate the unit if it is damaged or has
malfunctioned. If you suspect the unit is damaged, please
contact customer service.
The appliance is employed a manually reset thermal cut-out
for safeguard, if it operates, please inspect for any
objects,on or adjacent to the heater ,which may cause high
temperatures.DO NOT OPERATE THE HEATER UNTIL
TROUBLESHOOTING . Reset switch by turning main power
switch off and waiting 5 to 10 minutes then turning it back
on.
Loading ...
Loading ...
Loading ...