Loading ...
Loading ...
Loading ...
12
mCAUTION! Always ensure proper footing and balance
in a clean and clear work environment before switching on the
cordless pruner.
Adjusting the Telescoping Pole (Optional)
When being used as the telescoping pole pruner, the machine
is equipped with a telescoping pole which provides up to an
additional 5.83 ft (1.78 m) of overhead reach. To adjust the
telescoping pole, follow the instructions below.
1. Release the trigger switch and the safety lock button.
Removed the battery from the compartment. Wait until the
tool has stopped completely.
2. Flip up the telescoping pole cam-lock, and extend the
pole to the desired length (Fig. 16).
NOTE: Push poles toward each other to shorten the pole
or pull them away from each other to lengthen the pole.
Only extend the pole to the minimum length required to
reach the limb to be cut.
3. Lock the pole in position by closing the cam-lock, and
ensure that the pole is secure.
Adjusting the Cutting Angle (Optional)
The pole assembly is also equipped with a rotating function
that will enable the pruner to cut in any of 7 positions. (-45º,
-22.5º, 0º, 22.5º, 45º, 67.5º, 90º) (Fig. 17). To adjust the cutting
angle, follow the instructions below.
1. Release the trigger switch and the safety lock button.
Removed the battery from the compartment. Wait until the
tool has stopped completely.
2. Hold the pole tightly. Press the rotating button and turn the
cutting head to the desired position. Release the rotating
button and check to make sure that the cutting head is
locked in place (Fig. 18).
Fig. 15
TELESCOPING POLE
PRUNER MODE
Trigger switch
Safety lock button
Fig. 16
Telescoping pole
cam-lock
Telescoping pole
Fig. 17
0°
-22.5°
-45°
22.5°
45°
67.5°
90°
Fig. 18
Rotating button
Cutting head
Loading ...
Loading ...
Loading ...