Loading ...
Loading ...
Loading ...
a. In waiting state, press the relevant menu key in the sensor cook, put the food in the
oven. " REHEAT" ," PIZZA"," FRZ. VEG" POTATO" and "MEAT"
will display twice in turn .The " " and the " " will be lighted.
b. Press " " to start sensor reheat function and no need to set time.
The " " and the " " will flash. If the sensor receive the humidity signal, the
buzzer will sound 2 beeps, and the remaining time will display. Or the screen will
show "S-01"、"S-02"…"S-05".
EN-18
INSTRUCTION FOR USE
OPERATION
NOTE
• When cooking or reheating food, you should do these in order to have
the best effect.
a. The room temperature cannot be over 35 degrees.
b. The weight of food must be more than 110g (4 Oz).
c. The cavity, glass tray and utensils must kept drying before putting
the food in.
d. The reheat food can be covered with the lid. But the lid must has
vent hole in order to emanate the steam. Sealed utensil is forbidden.
e. If the cavity is too hot, the sensor cook can not be started.
• During cooking process, following points must be done.
a. Keep the door close when the remaining time is not displays or the
buzzer does not sound twice.
b. When the buzzer sound twice , the time will count down and
display the rem ing time, you can open the door to mix the food up ,
turn over or replace the food. And then go on the next operation.
• Please leave the food alone for a while after cooking have been
finished.
• During sensor cooking process, if the time not count down, please do
not open the oven door or press " " key. Otherwise, the sensor
will make mistakes.
• After 35 seconds sensor cooking, the buzzer sound 1 beep to start
self-checking. If the sensor do not work, the oven will go back to
waiting state after 40seconds.
9. Sensor Cooking
Loading ...
Loading ...
Loading ...