Loading ...
Loading ...
Loading ...
21
2 Preparation
All barista recipes are prepared following this model.
E The product selector view disappears automatically after
5 seconds if no preparation is started.
Example: Proceed as follows to prepare a White Cool.
Precondition:
‘Please select product:’ is displayed.
g T Turn the Rotary Switch to view the product selector.
g T Turn the Rotary Switch until the product
‘White Cool’ is in
focus.
k T Press the Rotary Switch to start preparation.
T Follow the instructions on the display and confirm by press-
ing the
‘Next’ button.
E You can stop preparation at any time by pressing the
‘’ but-
ton.
E Just before preparation starts, you are asked which grinder
and therefore which beans you want to use.
E You cannot make any permanent settings for barista recipes.
During preparation, you can however change the coffee
strength and quantities by turning the Rotary Switch g.
It is easy to make permanent settings for the amounts (amount of
water, amount of milk etc.) for all products according to the cup size.
Adjust the amount once as shown in the following example. Every
time you prepare a drink in the future, this amount of water will be
dispensed.
The permanent settings for adapting the amounts to the cup size
for all products follow this model.
Example: Proceed as follows to permanently set the amount of
water for one coffee.
Precondition:
‘Please select product:’ is displayed.
T Place a cup under the dual spout.
T Press and hold the
‘Coffee’ button.
‘Coffee’ and the fill volume are displayed.
T Hold the
‘Coffee’ button down until ‘Enough coffee? Press
button.’
appears.
T Release the
‘Coffee’ button.
Preparation starts and the coffee flows into the cup.
Preparing barista recipes
Permanently setting
amounts for the cup size
Loading ...
Loading ...
Loading ...