Loading ...
Loading ...
Loading ...
11
BURNERS WITH TWO-RING FLAME
This special burner has two separate ame rings to provide a real full heat regulation
from high power to simmering.
To set:
1. Push and turn counterclockwise the knob
between HI-LO main ame, when the burner
is turned on, the main ame and the Simmer
ame will always light and stay on.
2. Setting heat level main ame from HI-LO
power.
Simmer setting
Turn the knob counterclockwise on HI-LO
simmering position. The simmer ame setting will
use only the center ame.
Turn o the burner
HI
MED
LO
OFF
Turn the knob clockwise as far as it will go to the o position.
BURNER USE SUGGESTIONS
•
Use the right front, right rear or left rear burners for simmering, or for cooking
smaller quantities of food requiring small cookware.
•
Use the left front POWER burner for bringing liquids to a rapid boil, cooking large
quantities of food, or for deep-fat frying requiring large cookware.
The Burner Flames
Turn each burner on. Flames should be blue in color with no trace of yellow. The
burner ames should not utter or blow away from the burner. The inner cone of the
ame should be between ” and ” long.
SUPER SEALED SURFACE BURNERS
IMPORTANT: Do not obstruct the ow of combustion and ventilation air around the
burner grate edges.
Burner cap and gas spreader
Always keep the burner cap and gas spreader in place when using a surface burner.
A clean burner cap and spreader will help prevent poor ignition and uneven ames.
Always clean the part after a spillover and routinely remove and clean according to
the “General Cleaning” section.
Loading ...
Loading ...
Loading ...