Loading ...
Loading ...
Loading ...
53
Problem Possible Causes What To Do
Excessive smoking Excessive soil. • Touch the CLEAR/OFF pad. Open the windows to
rid the room of smoke. Wait until the LOCKED DOOR
light goes off. Wipe up the excess soil and reset the
clean cycle.
Oven door will not open Oven too hot. • Allow the oven to cool below locking temperature.
after a clean cycle
Oven not clean after a Oven controls not properly set. • See the Using the self-cleaning upper oven section.
clean cycle
Oven was heavily soiled. • Clean up heavy spillovers before starting the clean
cycle. Heavily soiled ovens may need to self-clean
again or for a longer period of time.
“LOCK DOOR” flashes The self-clean cycle has been • Close the oven door.
in the display selected but the door is not
closed.
LOCKED DOOR light The oven door is locked • Touch the CLEAR/OFF pad. Allow the oven to cool.
is on when you want because the temperature
to cook inside the oven has not
dropped below the
locking temperature.
“F—and a number or You have a function error code. • Touch the CLEAR/OFF pad. Allow the oven to cool for
letter” flash in the display one hour. Put the oven back into operation.
If the function code repeats. • Disconnect all power to the range for 5 minutes
and then reconnect power. If the function error
code repeats, call for service.
Oven racks are The gray porcelain-coated racks • Apply a small amount of vegetable oil to a paper
difficult to slide were improperly cleaned. towel and wipe the edges of the oven racks with
the paper towel. Do not spray with Pam
®
or other
lubricant sprays.
“Probe” appears in This is reminding you to enter a • Enter a probe temperature.
the display probe temperature after plugging
in the probe.
LOC appears in The Gas/Control Lockout feature • Be sure the surface burner controls are turned OFF.
the display is activated. Turn this feature off to use the range. See the
Gas/Control Lockout section.
GEAppliances.com
Consumer Support
Installation
Instructions
Troubleshooting Tips
Operating Instructions
Safety Instructions
Loading ...
Loading ...
Loading ...