Loading ...
Loading ...
Loading ...
14
EN
COMMISSIONING AND OPERATION
• Put water and/or food in the container (The total amount of water and /or
food should not exceed 80% of the container to avoid overowing), put a lid
on the container and place it on the hot plate. If there is smoke for the rst
use, that is normal. To make the unit heat without any pot about 10 Minutes
before cooking.
• Connecting to the power supply socket. Turn the switch from “OFF” TO “MAX”
position and the indicator light is on for working, the hot plate is in a state of
heating.
• Two points to be reminded by the user when using the new hot plate:
• When using this hot plate for the rst time, there may be a smell of smoke
coming from the surface of the heating element. This is normal because of the
invisible protective coating in production.
• Before the water is boiling, the indicator light on the hot plate may be
temporary o due to the temporary disconnection of the thermostatic control.
• This is a safety issue for the working on the hot plate.
• When you have nished using the hot plate, turn the switch to “OFF” position
and unplug it from the socket. Wait until the appliance is completely cooled
down before moving or cleaning.
CLEANING AND CARE
• Before cleaning, unplug the appliance from the wall outlet and allow it to cool
down.
• Rub the hot plates with a damp cloth.
• Do not use scouring pads or steel wool as this may damage the surface of the
appliance.
Loading ...
Loading ...
Loading ...