Loading ...
Loading ...
Loading ...
English Installation and Operating Guide Page 41
pro.Bose.com Installation and Operating Guide
Technical Specifications - PM8500 / PM8500N
Power Rating
1
2
Ω
4
Ω
8
Ω
70 V 100 V
THD for Power Rating, Typical < 0.1 % < 0.1% < 0.1% 1% 1%
Mono Mode 450 W 500 W 300 W See footnote 3 See footnote 3
V-Bridge Mode 450 W
2
1000 W 1000 W 800 W 1000 W
I-Share Mode 1000 W 500 W
2
300 W
2
Not available Not available
Quad Mode 1000 W
2
2000 W 1000 W
2
1600 W 2000 W
Maximum Rated Power 4000 W (total all channels)
Peak Output Voltage 71 / 142 V (Mono / V-Bridge, I-Share, and Quad modes)
Voltage Gain 33 / 36 / 33 / 36 dB (Mono / V-Bridge / I-Share / Quad modes)
Audio Inputs Analog Digital (Optional Card)
Input Channels 8 (balanced line level) 8
Input Impedance > 100 kΩ N/A
Sensitivity 0, +4, +12, +24 dBu, selectable Digital: 0, -12, -20, -24 dBFS, selectable
Maximum Input Level +24 dBu (at 24 dBu sensitivity setting) N/A
Connectors, Input 3-pin Phoenix Contact
®
(green color; part # 1776168) Card Dependent
Audio Outputs
Output Channels 2 to 8 configurable
Connectors, Output 8-pin Phoenix Contact connectors (part # 1778120), supports 10-24 AWG wire
Electrical Specification
Mains Voltage 100-240 V (50/60 Hz)
Mains Circuit Recommendation 20A (120 V) or 16A (230 V)
Mains Connector IEC 60320-C20 (Inlet)
Minimum AC Line Voltage 80 V (reduced output power)
Maximum Inrush Current 15.4 A (230 VAC, 50 Hz)
Maximum RMS Current Draw 15 A
Efficiency, 1/3 Rated Power > 75 % (pink noise input signal, typical)
Output Stage Topology Class-D
Overload Protection High temperature, DC, HF, short, voltage limiter, current limiter, inrush current, mains circuit breaker protection
Physical
Dimensions 3.5" H x 19" W x 20.7" D (88 mm x 483 mm x 525 mm) - EIA-310 standard width, 2RU height
Net Weight 28.4 lb (12.9 kg)
Shipping Weight 34.5 lb (15.7 kg)
Mounting Depth 21" (533 mm)
Operating Temperature 32 °F - 104 °F (0 °C - 40 °C)
Cooling System Microprocessor-controlled, variable-speed fans, front to rear airflow
(1) Output power is measured per channel, all channels driven, using test signals at 1 kHz.
(2) Configuration not recommended / not optimal.
(3) Limited use available. Tap 70V loudspeakers 2x the desired power. Tap 100V loudspeakers 4x the desired power. Refer to the application note “Using MONO Mode to Drive High
Impedance Loudspeaker Loads.”
Loading ...
Loading ...
Loading ...