Loading ...
Loading ...
Loading ...
Installation
2
6
2
7
Installation
3.6.4.3 DC/AC terminal connection:
1) Make sure that the DC/AC breaker is
2) Insert the DC+/- wiring terminal into corresponding DC+/- terminal.
Fig.3-41
3) Insert the AC wiring terminal into the AC terminal.
4) Switch on the AC breaker.
5) Turn the DC switch to the “ON” state.
Fig.3-42
DC1+ DC1- DC2- DC2+
AC
OUTPUT
DC1+ DC1- DC2- DC2+
DC1+ DC1- DC2- DC2+
AC
OUTPUT
AC
OUTPUT
AC
OUTPUT
.
Step 6 Secure the adapter to the coupling nut, as shown in
Figure 3-38 Connecting an AC output power cable (4)
Step 7 Secure the cable gland to the adapter, as shown in Figure 3-39.
Tighten the cable gland to a torque of 5 N.m (You need to use some tool to achieve
this torque)
Figure 3-39 Connecting an AC output power cable (5)
Step 8 Connect the AC output connector to the bayonet coupling of the AC output wiring
terminal on the Inverter and rotate it clockwise until you hear a "click" sound,
as shown in Figure 3-40.
Because no sufficient space is available on the right of the AC terminal, tighten
the terminal using the left hand.
Figure 3-40 Connecting an AC output power cable (6)
The AC output connector securely connects to the AC
output wiring terminal after the bayonet coupling snaps into place.
Notice
Figure 3-38
Loading ...
Loading ...
Loading ...