Loading ...
Loading ...
Loading ...
16 - ENGLISH
OPERATION OPERATION
Disconnecting a Bluetooth® device
• Turn o the Bluetooth® feature on your device.
• If your mobile device supports NFC, tap the NFC touchpoint on your mobile device to
the center of the right earcup. Tap again to reconnect.
Reconnecting a previously connected device
When powered on, the headphones will automatically try to reconnect with the two
most recently connected devices. Make sure the device(s) are within range and
powered on.
Scrolling through other paired devices
To play music from a device in the headphone memory that is not currently connected:
1. Slide all the way up to the symbol and release to hear which device(s) are
currently connected.
2. Within two seconds, slide all the way up to the symbol and release again to
connect to the next paired device.
3. Repeat step 2 until you hear the correct device name.
Note: To use this feature, voice prompts must be on. (See “Turning voice prompts
o/on” on page 12.)
Note: If a device is not within Bluetooth range (30 ft. or 9 m), scroll to the
next device.
Clearing the headphone memory
To clear the headphone memory of all devices:
1. Slide all the way up to the symbol and hold for ten seconds, until you hear
“Bluetooth device list cleared.”
2. Delete Bose AE2 SoundLink from the Bluetooth list on your mobile device.
All Bluetooth devices are cleared and the headphones are ready to pair.
Loading ...
Loading ...
Loading ...