Loading ...
Loading ...
Loading ...
P/N YRD256-MNL-0003 Rev E
18
Setting Definitions
*The Master Entry Code must be created prior to any other programming of the lock.
Creation required*
Wrong Code Entry Limit
5 Times
One Touch Locking
Enabled
Inside Indicator Light
Disabled (Off)
Settings Default Setting
Master Entry Code
Auto Re-lock
Disabled
Volume
Enabled (Low)
Shutdown Time 60 Seconds
Privacy Button
Disabled
All Code Lockout Mode
Disabled
Language English
Definition
The Master Entry Code is used for programming and for feature
settings. It must be created prior to programming the lock. The
Master code will also operate (unlock/lock) the lock.
After a successful code entry or manual unlock with the key, the
lock will automatically re-lock after each unlock in an effort to keep
your home secure. This feature is optional, and can be turned off.
In the ON mode, the lock will automatically re-lock after thirty (30)
seconds.
Located on the inside lock. Shows active status (Locked) of lock
and can be enabled or disabled in the Advanced Lock Settings
(Main Menu selection #3).
When the latch is retracted, activating the keypad will extend the
latch (during Auto Re-lock duration or when Auto Re-lock is
disabled). When One-Touch Re-lock is not in use (disabled), any
valid PIN code will re-lock the lock.
Privacy mode is disabled by default. Enable Privacy mode by
pressing the privacy button for 4 seconds to put the lock in do-
not-disturb mode (all pin codes are disabled).
The volume setting for entry code verification is set to Low (2) by
default; otherwise it can be set to High (1) or Silent (3) for quiet
areas.
Choosing English (1), Spanish (2) or French (3) becomes the
(default) setting for the lock's voice prompts.
This feature is enabled by the Master Entry Code. When enabled, it
restricts all user (except Master) Entry Code access. When
attempting to enter a code while the lock is in All Code Lockout
mode, the RED locked padlock will appear on the screen.
After five (5) unsuccessful attempts at entering a valid entry code,
the lock will shut down and not allow operation for sixty (60)
seconds.
The Lock will shutdown (flashing RED) for sixty (60) seconds and
not allow operation after the wrong code entry limit (5 attempts)
has been met.
Loading ...
Loading ...
Loading ...