Loading ...
Loading ...
Loading ...
10
Technical Data
Battery Voltage* ........................... 40 V D.C.
Battery Capacity ......................... See page 23 for battery
options and specications
Charging Time .............................See page 23 for battery
options and specications
Battery Run Time ........................ See page 23 for battery
options and specications
No Load Speed ...........................4800 ± 10% rpm
Motor ...........................................600 W brushless
Bar Chain Length ........................8 in. (20.3 cm)
Cutting Thickness Max ............... 7.5 in. (19 cm)
Recommended: 6.5 in. (16.5 cm)
Multi-Angle Head ........................ 0º or 30º
Telescopic Shaft ......................... 6.1 ft to 8.5 ft
(1.85 m to 2.6 m)
Overhead Reach ......................... 15 ft (4.6 m)
Oil Tank Capacity ........................2.7 oz (80 ml)
Weight (without battery) ..............8.6 lbs (3.9 kg)
*Initial no-load voltage, when fully charged, peaks at 40 volts; nominal voltage
under typical load is 36 volts.
)
Unpacking
Carton Contents
• Cordless pole chain saw
• 8 in. (20.3 cm) chain
• 8 in. (20.3 cm) guide bar
• Dual-tipped hex key wrench/blade screwdriver
• Cutting bar sheath
• Manual and registration card
NOTE: In order to operate this cordless pole chain saw you will
need 40V iONMAX System batteries and chargers. See page 23
for battery options and specications, or visit sunjoe.com.
1. Carefully remove the cordless pole chain saw and check
to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store.
Please call the Snow Joe
®
+ Sun Joe
®
customer service
center at 1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new cordless pole
chain saw. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils or
small parts. These items can be swallowed and pose a
suocation risk!
Battery Pack Operation
NOTE: In order to operate this cordless pole chain saw,
you will need 40V iONMAX System batteries and chargers.
See page 23 for battery options and specications, or visit
sunjoe.com.
The equipment is powered by a lithium-ion battery.
The battery pack is completely sealed and maintenance free.
Battery Charge Level Indicator
The battery pack is equipped with a push button for checking
the charge level. Simply press the push button to read o the
battery charge level from the LEDs of the battery indicator:
• All 3 level monitoring LEDs are lit: Battery charge level
is high.
• 2 level monitoring LEDs are lit: Battery charge level is
decreasing. Stop work as soon as possible.
• 1 level monitoring LED is lit: Battery is at. Stop work
IMMEDIATELY and charge the battery. Otherwise the
battery’s service life will be greatly shortened.
NOTE: If the charge level button does not appear to be
working, place the battery pack on the charger and charge
as needed.
Immediately after using the battery pack, the charge level
button may display a lower charge than it will if checked a few
minutes later. The battery cells “recover” some of their charge
after resting.
In order to operate this cordless pole chain saw you will
need a 40V iONMAX System battery and charger. See page
23 for battery and charger options and specications, or for
more information visit sunjoe.com.
CORE TOOL
BATTERY + CHARGER SOLD SEPARATELY
Charge level button
The battery is at 30% capacity
and requires charging
The battery is at 60% capacity
and requires charging soon
The battery is at full capacity
Light IndicatorsLights
Loading ...
Loading ...
Loading ...