The
ZIRCON
Advantage
• Helps map out the grid of metal through
any nonmetallic construction material,
including concrete, tile, and marble before
drilling or coring.
• Indicates metal type—magnetic (such as rebar)
or nonmagnetic (such as copper pipe).
• Shows the depth of metal from the surface
in both inches and centimeters.
• Has on-screen graphics that are easy-to-read
and interpret. Screen displays proximity, type
of metal, and depth of metal.
• Made to withstand daily jobsite use.
The MT 6 metal locator finds both ferrous and
nonferrous metal, and indicates depth up to
6 inches (152 mm) deep.
Key Features
• Locates metal up to 6 inches deep
• Finds all types of metal
• Identifies magnetic vs. nonmagnetic
• Indicates depth of metal found
• Large LCD screen
• Tough for jobsite use
Applications
Find rebar, metal pipes, conduit,
and plumbing before:
• Drilling into slabs for anchor bolts
• Coring through floors for
wire bundles
• Cutting openings in concrete walls
• Drilling to add rebar to slab joints
• Estimating a demolition job
– Find nails in used lumber before
sawing, planing, or sanding
MT 6
Electronic
Metal Locator
www.zircon.com
MT 6 Technical Information
Dimensions 8.87 in. L x 3.84 in. W x 2.23 in. D
(251 mm x 109 mm x 63 mm)
Weight 10.1 oz. (286 g) without battery
Battery type 9-V alkaline (not included)
Position accuracy Center of #4 (
1
⁄
2
in.) rebar or
1
⁄
2
in. (13 mm) copper pipe
at a minimum grid spacing of 6 in. (152 mm) typically
within
1
⁄
2
in. (13 mm)
Depth Up to 6 in. ±1 in. (152 mm ±25 mm)
Operating temperature 20° to 120°F (-7° to 49°C)
Storage temperature -20° to 150°F (-29° to 66°C)
Humidity 80% RH (noncondensing)
Water resistance Splash and water resistant, not waterproof
Order Information Part Number UPC
MT 6 58594 0 42186 58594 0
®
1580 Dell Avenue
Campbell, CA 95008-6992
Tel: 800-245-9265 or 408-866-8600
Fax: 408-866-9230
E-mail: [email protected]
©2002 Zircon Corporation • Col #0464 Rev A (05/02)
