Loading ...
Loading ...
Loading ...
3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2.5 in. (64 mm). Be sure to drill into the center
of the studs.
4. Install wall plate using four lag bolts and washers . Tighten the lag bolts only until they
are pulled firmly against the wall plate.
CAUTION: Improper use could reduce the holding power of the lag bolt.
DO NOT over-tighten the lag bolts.
Go to STEP 3 on PAGE 14.
2.5"(64mm)
7/32"
(5.5mm)
11
16"
Wall plate
UP
No!
Loading ...
Loading ...
Loading ...