Loading ...
Loading ...
Loading ...
Setting up your dishwasher
Control panel
The Control Panel section has instructions for the DW60R2014US and the DW60R201AP.
Instructions for the DW60R2014US start below. Instructions for the DW60R2014AP start
on page 14.
DW60R2014US
01
04
03
02
06
07
08
09
05
01 POWER
When you press the POWER button, the entire display turns on and
off. When the selected cycle is complete, the dishwasher powers off
automatically.
02 Cycles To select a wash cycle, press this button.
03 Half Load
For small amount of loading items, press the Half Load button to
save energy.
04 Delay Start
Delay a cycle for up to 24 hours in one-hour increments. The hour
displayed indicates the time at which the wash will be started.
05 Display
Window
Displays the running time, Delay start hours, and information codes.
If a problem occurs during operation, a check message will be
displayed with a warning sound.
06 Sanitize
The temperature rises to 163 ˚F (73 ˚C) in the nal rinse cycle for
high temperature sanitization. If you select the Sanitize option,
the “Sanitize” lamp blinks when the water temperature reaches
the sanitary temperature [over 156 ˚F (69 ˚C)], and then remains
illuminated until the Sanitize option ends. When you press the
POWER button, the “Sanitize” lamp turns off.
NOTE
• The Normal cycle with the Sanitize option selected is NSF
certied.
• The Sanitize feature operates in accordance with NSF/ANSI
Standard 184 for residential dishwashers. Certied residential
dishwashers are not intended for licensed food establishments.
• Only sanitizing cycles have been designed to meet the
requirements of 6 for soil removal and sanitization efcacy. There
is no intention, either directly or indirectly, that all cycles on a
certied machine have passed the sanitization performance test.
English12
Setting up your dishwasher
DW60R2014_DD81-02706A-01_EN+CFR+MES.indb 12DW60R2014_DD81-02706A-01_EN+CFR+MES.indb 12 2021-03-16 10:01:542021-03-16 10:01:54
Loading ...
Loading ...
Loading ...