Loading ...
Loading ...
Loading ...
EMPTYING THE BIN
Hold the container over the bin and press the
easy open button.
The container release flap will open and you
can empty the debris into the waste bin with
no dust contact.
Once emptied, gently tap or shake the container
to release any excess dust.
Do not overfill the bin above the max level line.
2
43
To remove the bin from the cleaner press the
bin release button.
1
CLEANING THE PRE MOTOR FILTERS
CLEANING THE EXHAUST FILTER
Rotate the upper part of the dust bin to open.
1
1
2
3
Take out the pre motor lter and the separation
unit from the dust bin. clean excess debris from the
separation unit and ret.
2
Gently tap both lters to release
any excess dust.
3
Wash both lter and sponge under warm water until
the water runs clean. Remove excess water by
shaking and leave to dry for 24 hours. Reassemble
and ret lters to cleaner, only when they are
completely dry.
4
!
- 5 -
<40
<40
GB
IMPORTANT: Before emptying the bin, make
sure vacuum cleaner has been switched off.
Remove the exhaust grille by pressing the button.
Remove the exhaust lter by pressing the latch on both
sides.
The exhaust lter should be washed every month.
Remove the exhaust lter from your cleaner and wash
with lukewarm water.
Remove excess water by shaking and leave to dry for
24 hours. Ret lters only when completely dry.
<40
<40
<40
Loading ...
Loading ...
Loading ...