Loading ...
Loading ...
Loading ...
PREPARING YOUR CLEANER
Insert the main handle in the
cleaner body and then adjust
handle up/down to the desired
height.
Assemble the mini turbo brush
holder to the handle tube of
the cleaner,then put the mini
turbo nozzle to the holder.
MINI TURBO BRUSH ASSEMBLY*
SUPPLY CORD
SWITCH
Put 2-in-1 tool and crevice tool
on board storage area.
- 3 -
* Certain models only
1
2
GB
1.Main power On/Off switch
Press the ON/OFF switch to
operate the cleaner.
2.Brush Bar Switch
Press the brush bar on/off
button at the top of the unit.
Brush Bar ON - recommended
for carpets.
Brush Bar OFF - suitable for
hard floors.
Do not run over the supply cord.
Clip the supply cord in the cord
clip at the back of the handle
to avoid accidentally running
the cleaner over the cord and
causing any damage.
This vacuum cleaner features Intellicare technology
which helps to protect your carpet from unnecessary
wear. When you stop moving the cleaner, the nozzle
power will be automatically cut off. You can still use
on hose mode with accessories. When the cleaner is
moved, the power nozzle automatically reverts back
to full power.*
Twist the handle to manoeuvre under or around the
funiture.
Your product is fitted with suction control which
allows you to select the desired suction level by
sliding the regulator up or down. It can also be used
to reduce the operating push force if required.
CLEANER RELEASE
INTELLICARE TECHNOLOGY
MANOEUVRABILITY
SUCTION CONTROL
Recline to unlock the cleaner.
Loading ...
Loading ...
Loading ...