Klarstein 10037807 User Manual

Loading ...

Electrical Connection for Gas hob

Fit the supply cord with a standard plug for the demand rate indicated on the rating

plate or connect it directly to the electrical mains. In the latter case, a single pole switch

must be placed between the hob and the mains, with a minimum opening between the

contacts of 3 mm in compliance with current safety codes (the earthing wire must not be

interrupted by the switch). The power supply cord must be positioned so that it does not

reach a temperature in excess of 50°C than room temperature at any point.

Before actual connection make sure that:

• The fuse and electrical system can withstand the load required by the hob;

• The electrical supply system is equipped with an efcient earth hook-up according

to the norms and regulations prescribed by law;

• The plug or switch are easily accessible.

IMPORTANT: the wires in the main lead are coloured in accordance with the following

code:

• Green & Yellow - Earth

• Blue - Neutral

• Brown - Live

As the colours of the wires in the main lead may not correspond with the coloured

markings identifying the terminals in your plug, proceed as follows:

• As the colours of the wires in the main lead may not correspond with the coloured

markings identifying the terminals in your plug, proceed as follows: Connect the

Green & Yellow wire to terminal marked "E" or

or coloured Green or Green &

Yellow.

• Connect the Brown wire to the terminal marked "L" or coloured Red.

• Connect the Blue wire to the terminal marked "N" or coloured Black.

Loading ...

Klarstein 10037807 Goldflame Domino 4 Prime Gas Hob