Loading ...
Loading ...
Loading ...
preparing: get the handle, screws, handle cover, hole covers.
step 1: get two screws into the handle up holes, fix it into the door shell.
step 2: get two screws into the handle lower holes, fix into the door shell.
step 3: get the handle cover, fix it to the handle front, pressure the cover from one side to another
side.
step 4: get the hole cover, pressure it into the hole of the handle.
notice:
1. when fix the handle, should keep the handle and the display cover in same line, as the following
picture yellow line show.
preparing: get the lock, screws, lock cover.
step 1: dig the foaming layer about 8-10mm depth.
step 2: put the lock core and the supporter into the hole.
step 3: fix the lock supporter with two screws.
step 4: get the lock cover, the pressure it to the lock supporter, from one side to other side, as the
following picture show.
notice:
1. when fix the lock, should keep the lock cover and the handle right and left position in same line,
as the following picture yellow line show.
2. could through changing the screws fixed position to change the lock supporter position.
Loading ...
Loading ...