FLCM-RK User Manual

Loading ...

FLYCAM REDKING VIDEO CAMERA STABILIZER 7

If the Stabilizer lts to the front, then you

will have to turn the adjustment knob

counter clockwise. If the Stabilizer sll

lts to the front, then move the dovetail

quick release plate more to the back by

turning the adjustment knob. If the Stabi-

lizer is lng to the back, then move the

dovetail quick release plate to the front by

turning the adjustment knob clockwise.

Always secure the dovetail quick release

plate lock aer any adjustments. If you

cannot get the front to back axis balanced

with this method then try remounng your

camera to a dierent posion on the

dovetail quick release plate.

Balancing the vercal axis now that your Stabilizer is horizontally balanced, it’s vercal axis can

now be tested and properly balanced. The objecve in obtaining correct vercal balance of the

Stabilizer is to allow the camera and Stabilizer to remain level during operaon, given you are

not applying either a pan, lt, or roll type of hand pressure to the Stabilizer, and most

importantly, that the Stabilizer remains vercal, even if you are walking, running, or turning,

while the Stabilizer is in operaon. In other words, if the Stabilizer is vercally balanced

correctly, then the camera will remain level, and the central post will remain vercal, unless you

intenonally posion the Stabilizer otherwise. If the Stabilizer is not vercally balanced properly,

then it will swing about and pendulum when you walk, run, or turn.

B A L A N C I N G T H E H O R I ZO N TA L A X I S

HOLDING YOUR FLYCAM STABILIZER

When handling your Flycam HD-5000 Handheld Stabilizer one hand holds onto the handle while

the other is used to gently guide the camera in the direcon you wish to shoot and frame the

shot. For normal shoong, hold the handle in the middle.

Loading ...

User Manual - Page 7