Loading ...
Loading ...
Loading ...
10
Safety Instructions
Operating Instructions
Care and CleaningTroubleshooting TipsCustomer Service
Using the oven controls.
Throughout this manual, features and appearance may vary from your model.
Oven Control, Clock and Timer Features and Settings
BAKE Pad
Press this pad to select the bake function.
BROIL HI/LO Pad
Press this pad to select the broil function.
Display
Shows the time of day and the time set for
the timer.
If “F— and a number or letter” flash in the display
and the oven control signals, this indicates a
function error code. Press the CLEAR/OFF pad. Allow the
oven to cool for one hour. Put the oven back into operation.
If the function error code repeats, disconnect the power to
the oven and call for service.
If a flashing time of day is in the display, you have
experienced a power failure. Reset the clock.
If your oven was set for a timed oven operation when
the power outage occurred, the clock and all
programmed functions must be reset.
The time of day will flash in the display when the
oven is first turned on.
COOKING TIME Pad
Press this pad and then press the INCREASE
or DECREASE pads to set the amount of
time you want your food to cook. The oven
will shut off when the cooking time has
run out.
DELAY START Pad
Press this pad and the INCREASE or
DECREASE pads to delay the starting of
your oven up to 9 hours and 59 minutes.
CLOCK Pad
Press this pad before setting the clock.
KITCHEN TIMER ON/OFF Pad
Press this pad to select the timer feature.
START Pad
Must be pressed to start any cooking or
cleaning function.
DECREASE Pad
Short taps to this pad will decrease the
time or temperature by small amounts.
Press and hold the pad to decrease the
time or temperature by larger amounts.
INCREASE Pad
Short taps to this pad will increase the time
or temperature by small amounts. Press
and hold the pad to increase the time or
temperature by larger amounts.
CLEAR/OFF Pad
Press this pad to cancel ALL oven
operations except the clock and timer.
SELF CLEAN Pad
Press this pad to select the self-cleaning
function. See the Using the self-cleaning
oven section.
Loading ...
Loading ...
Loading ...