Loading ...
Loading ...
Loading ...
USA
5
AFTER SALES SUPPORT
Operating Instructions
BEFORE FIRST USE
1. Carefully unpack the blender and remove all packaging materials. Check the
contents to ensure that all parts and accessories are present, and have been
received in good condition.
2. Handle the blending blade attachment by its collar only.
WARNING: Do not touch blade. The blade attachment is very sharp. Use extreme
care when handling. Failure to do so can result in personal injury.
3. Wash all lids in warm, soapy water. Rinse and dry thoroughly.
4. Clean each cup before first use. Fill processing cup one-quarter full with clean,
warm water and operate several times until clean. Rinse thoroughly.
5. The motor base may be wiped with a damp cloth.
WARNING: DO NOT IMMERSE THE MOTOR BASE IN WATER.
PLASTICIZER WARNING
CAUTION: To prevent plasticizers from migrating from the finish of the counter top
or table top or other furniture, place NON-PLASTIC coasters or place mats between
the appliance and the finish of the counter top or table top. Failure to do so may
cause the finish to darken; permanent blemishes may occur or stains can appear.
OPERATING INSTRUCTIONS
1. Place the motor base on a flat, clean, dry countertop or table.
2. Make sure the unit is unplugged.
3. Place the food to be processed into the cup.
4. To assemble for blending, chopping, or mixing, using the blade's collar to handle,
place the blending blade into the tall blending cup.
5. IMPORTANT: Check to make sure the cup ring is not attached to the blending cup
before assembling the blade. If it is, simply lift off to remove.
IMPORTANT: In the base of the blade's collar, there is a plastic gasket seal that
creates an airtight fit with the processing cups. After dishwashing and before
each use, always check to make sure the gasket is properly in place, as the heat
from some dishwashers may cause the gasket to become loose.
WARNING: Never operate the blender when the cup is empty.
WARNING: Never overfill the cup. Do not exceed the MAX line.
6. Hold the cup firmly in one hand. Use the other hand to tighten the cup/ blade
assembly by turning the blade collar clockwise until snug.
Loading ...
Loading ...
Loading ...