Loading ...
Loading ...
Loading ...
up or carrying the appliance. Carrying the appliance with
your finger on the switch or energizing appliance that have the
switch on invites accidents.
b) Disconnect the battery pack from the appliance before
making any adjustments, changing accessories, or
storing appliance. Such preventive safety measures reduce
the risk of starting the appliance accidentally.
c) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of battery
pack may create a risk of fire when used with another battery
pack.
d) Use appliances only with specifically designated battery
packs. Use of any other battery packs may create a risk of injury
and fire.
e) When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws
or other small metal objects, that can make a connection
from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
f) Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or burns.
g) Do not use a battery pack or appliance that is damaged
or modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or risk of injury.
h) Do not expose a battery pack or appliance to fire or
excessive temperature. Exposure to fire or temperature
above 265°F may cause explosion.
i) Have servicing performed by a qualified repair person
using only identical replacement parts. This will ensure that
the safety of the product is maintained.
• The label on your tool may include the following symbols. The
symbols and their definitions are as follows:
V ..............................volts A ..............................amperes
Hz ........................... hertz W ............................ watts
min.........................minutes or AC .............. alternating current
or DC .........
direct current or AC/DC ......alternating or direct
current
............................
Class I Construction
(grounded)
............................
Class II Construction
(double insulated)
…/min .................per minute no ........................... no load speed
BPM .......................beats per minute n ..............................rated speed
IPM .........................impacts per minute
............................
earthing terminal
RPM .......................revolutions per minute ........................... safety alert symbol
sfpm ......................surface feet per minute
...........................
visible radiation
SPM ........................strokes per minute
Important Safety Instructions for All
Battery Packs
When ordering replacement battery packs, be sure to include the
catalog number and voltage. Consult the chart at the end of this
manual for compatibility of chargers and battery packs.
The battery pack is not fully charged out of the carton. Before using
the battery pack and charger, read the safety instructions below and
then follow charging procedures outlined.
READ ALL INSTRUCTIONS
• Do not charge or use the battery pack in explosive
atmospheres, such as in the presence of flammable liquids,
gases or dust. Inserting or removing the battery pack from the
charger may ignite the dust or fumes.
• NEVER force the battery pack into the charger. DO NOT
modify the battery pack in any way to fit into a non-
English
3
Loading ...
Loading ...
Loading ...