Loading ...
Loading ...
Loading ...
JetStream Gigabit Smart Switch
Configuration
23
Figure 5-3 Main Page of the Switch
5.2 Configure the Switch Using CLI
You can log on to the switch and access the CLI by Logging on to the switch remotely
by a Telnet connection through an Ethernet port.
To log on to the switch by a Telnet
connection, please take the following steps:
1. Make sure the switch and the PC are in the same LAN. Click Start and type in "cmd"
in the Search programs and files window and press the Enter button.
Figure 5-4 Run Window
2. Type telnet 192.168.0.1 in the command prompt shown as Figure 5-5, and press the
Enter button.
Figure 5-5 Connecting to the Switch
Loading ...
Loading ...
Loading ...