Loading ...
Loading ...
Loading ...
4
• Do not use to pick up ammable or combustible liquids,
such as gasoline, or use in areas where they may be
present.
• Maintain the wet/dry vacuum with care – Keep the
air inlet/outlet clear and clean for optimal performance
and to reduce the risk of injury. Keep the housing dry,
clean and free from oil and grease. Follow the additional
recommendations described in the maintenance section of
this manual.
• Avoid dangerous environments – Do not use the wet/
dry vacuum in rain, damp or wet locations. Do not operate
the wet/dry vacuum in gaseous or explosive atmospheres
or use the wet/dry vacuum to pick up ammable or
combustible liquids. Motors in these tools normally spark,
and the sparks might ignite fumes.
• Keep rm footing and maintain good balance at all times.
Do not overreach. Overreaching can result in loss of
balance.
• Do not pick up anything that is burning or smoking, such as
cigarettes, matches or hot ashes.
• Do not use without the dust compartment or lters in place.
• Do not put any object into the tool's openings. Do not use
the tool with any opening blocked; keep openings free of
dust, lint, hair or any other object that may reduce air ow.
• Check the work area before each use. Remove all objects
such as rocks, broken glass, nails, wire or string which can
be thrown or become entangled in the machine.
• Prevent cords, plastic bags, or similar items from getting
sucked in. This may cause an overload or blocking of the
motor.
Electrical Safety
ATTENTION: If there are problems with the electrical
MAINS, short voltage drops may appear when starting the
equipment. This can, in turn, inuence other equipment
(e.g. cause a lamp to blink). If the MAINS-IMPEDANCE Zmax
< 0.335 OHM, such disturbances are not expected. (If you
require assistance, contact your local supply authority for
further information).
mWARNING! Electrical Shock Hazard – Before starting
up your machine, please check it carefully for any defects.
If you nd any, do not start up your machine. Contact your
authorized Snow Joe
®
+ Sun Joe
®
dealer or call the Snow Joe
®
+ Sun Joe
®
customer service center at 1-866-SNOWJOE
(1-866-766-9563).
The following should be observed when connecting the
unit to the electric supply:
• The electric supply connection should be performed by a
qualied person.
IMPORTANT: Only use water without any impurities for the
pressure washer. If there is a risk of running sand into the inlet
water (i.e. from your own well), an additional lter should be
installed.
Safety devices
The unloader valve can reduce pressure if it exceeds preset
values. The spray gun features a locking device. When the lock
is activated, the spray gun cannot be operated.
1. Thermal sensor – A thermal sensor protects the motor
against overloading. The machine will restart after a few
minutes when the thermal sensor has cooled.
2. Double insulation – In a double-insulated appliance, two
systems of insulation are provided instead of grounding.
No grounding means is provided on a double-insulated
appliance, nor should a means for grounding be added
to the appliance. Servicing a double-insulated appliance
requires extreme care and knowledge of the system, and
should be performed only by qualied service personnel at
an authorized Snow Joe
®
+ Sun Joe
®
dealer. Replacement
parts for a double-insulated appliance must be identical
to the parts they replace. A double-insulated appliance
is marked with the words “Double Insulation” or “Double
Insulated.” The symbol (square within a square) may
also be marked on the appliance.
This appliance is provided with double insulation. Use only
identical replacement parts. See instructions for servicing
of Double-Insulated Appliances.
3. Ground fault circuit interrupter (GFCI) protection – this
product is provided with a Ground Fault Circuit Interrupter
built into the power cord plug. If replacement of the plug
or cord is needed, use only identical replacement parts.
4. It is not recommended to use an extension cord with
this pressure washer + wet/dry vacuum. The unit comes
standard with a 35 ft GFCI power cable. Using an
extension cord may cause a drop in line voltage resulting
in loss of power and overheating.
Use only extension cords that are intended for outdoor
use. These extension cords are identied by marking
"Acceptable for use with outdoor appliance; store indoors
while not in use". Use only extension cord having an
electrical rating not less than the rating of the product. Do
not use damaged extension cords. Examine extension
cord before using and replace if damaged. Do not
abuse extension cord and do not yank on any cord to
disconnect. Keep cord away from heat and sharp edges.
Always disconnect extension cord from the receptacle
before disconnecting the product from the extension cord.
5. To reduce the risk of electric shock, this appliance has
a polarized plug (i.e. one blade is wider than the other).
The appliance plug will t into a polarized outlet only
one way.
If the appliance plug does not t fully into the outlet,
reverse the plug. If the plug still does not t, make sure
that you are using the correct polarized wall outlet. If the
plug still does not t, contact a qualied electrician to
install the proper wall outlet. Do not modify the appliance
plug, power cord receptacle, or power cord plug in
any way.
Loading ...
Loading ...
Loading ...