Loading ...
Loading ...
5
6
7
8
Perform door handing process
Wake up and test Kevo fob
Download the app and set up your smartphone
Re-key the lock (if needed) and install the battery cover
This step will teach the lock the orientation of your door and is crucial for lock operation.
Install 4 AA batteries in the battery pack.
Re-key the lock (if needed).
Press and release the enroll button on the fob
with a ballpoint pen to wake it up. When the
fob’s LED ashes green, the fob is awake and
ready for use.
Ensure correct polarity. For best results,
use new, non-rechargeable Alkaline
batteries only.
A
A
A
M
P (4x)
Make sure the door is open. Insert the
battery pack while pressing and holding the
Program button. Release the button when
the battery pack is all the way inside the lock
interior.
Bring your fob and standard key outside with
you and close the door. Make sure there is a
clear line of sight between the lock and the
fob. Touch the deadbolt rose.
Note: The deadbolt rose is the metallic
surface behind the light ring.
If your fob is unable to communicate with the
lock, see the online Troubleshooting Guide at
www.kwikset.com/kevo/support.
B
B
M
The Status LED will ash red and green,
and the lock will beep. Press and release
the Program button again. The latch bolt will
retract and extend on its own.
The light ring will spin blue, then ash amber
once and you will hear one beep. The door
will lock.
C
C
status LED
Did the latch bolt bolt retract and extend on
its own?
Install battery cover.
Touch the deadbolt rose again. The light ring
will spin blue, then ash green twice and you
will hear two beeps. The door will unlock.
D
B
D
Door handing process
was successful!
Proceed to next step
after latch bolt stops
moving.
Remove battery pack,
wait 15 seconds,
then attempt the
process again.
YES NO
or
J
enroll button
LED
deadbolt rose
Download the Kevo app at www.kwikset.com/
kevo/app or scan the QR code below.
Follow the instructions inside the app to create
an account, enroll your rst smartphone and send
eKeys to family and friends.
When using your phone to lock and
unlock the door, make sure the phone is
on, Bluetooth is enabled, and the Kevo
app is running in the background.
You may hold the phone in your hand,
pocket, bag or purse as long as there
is a clear line of sight between the lock
and the phone.
Press the deadbolt rose to lock and
unlock the door.
A B C
H
M
L
M
L
a
b
c
Re-key the lock to work with
your existing key. See the
supplied SmartKey Re-key
instructions for more
information.
IMPORTANT: Remove battery
pack before re-keying.
Reinstall battery pack.
N
Loading ...