Loading ...
Loading ...
Loading ...
45
ninjakitchen.eu
44
ninjakitchen.eu
CARE & MAINTENANCE
CLEANING
Separate all parts. Wash bowl in warm,
soapy water with a soft cloth.
• Hand-Washing
Wash bowl, lid, disc, and blade assemblies
in warm, soapy water. When washing
the blade assemblies, use a dishwashing
utensil with a handle to avoid direct hand
contact with blades.
Handle blade assemblies with care to
avoid contact with sharp edges. Rinse
and air-dry thoroughly.
• Dishwasher
All attachments are dishwasher safe. It
is recommended that the bowl, lid, disc,
and blade assemblies be placed on the
top rack of the dishwasher ONLY. Ensure
the blade assembly is removed from the
bowl before placing in the dishwasher.
Exercise care when handling blade
assemblies.
• Motor Base
Turn o the unit and unplug the motor
base before cleaning. Wipe motor base
with a clean, damp cloth.
DO NOT use abrasive cloths, pads,
or brushes to clean the base.
STORING
Wrap the power cord around the cord
wrap on the back of the motor base.
Store the unit upright and store all blade
assemblies inside or attached to the bowl
with the lid locked in place.
DO NOT stack items on top of the
containers. Store any remaining
attachments alongside the unit or in a
cabinet where they will not be damaged
or create a hazard.
RESETTING THE MOTOR THERMOSTAT
This unit features a unique safety system
that prevents damage to the motor and
drive system should you inadvertently
overload the unit. If the unit is overloaded,
the motor will be temporarily disabled.
Should this occur, follow the reset
procedure below.
1 Unplug the unit from the socket.
2 Allow the unit to cool for approximately
15 minutes.
3 Remove the bowl’s lid and blade
assembly. Empty the bowl and ensure
no ingredients are jamming the blade
assembly.
IMPORTANT: Ensure that maximum
capacities are not exceeded. This is the
most typical cause of appliance overload.
ORDERING REPLACEMENT PARTS
To order additional parts and attachments,
visit ninjakitchen.eu
6 Plug in the unit, then press the Power
button to turn it on. Select LOW.
The disc will begin spinning.
7 Add the ingredients you want to slice
or grate through the feed chute on the
lid. Use the food pusher to help guide
the ingredients through the feed chute.
The middle piece of the food pusher is
removable to use for smaller ingredients.
8 When fi nished, stop the unit by touching
the Power button and wait for the disc
to stop spinning. Press the button on the
feed chute lid near the handle to unlock,
then turn the lid anti-clockwise. Lift the lid
from the bowl.
9 Using the fi nger holes, carefully lift the
disc out of the bowl.
10 Grasp the spindle by the top of the
shaft and lift it out of the bowl.
12 Press the Power button to turn the unit
o , then unplug the unit. Refer to the
Care & Maintenance section for cleaning
and storage instructions.
11 To remove the bowl from the motor
base, turn the bowl anti-clockwise
and then lift it.
ENGLISH
Loading ...
Loading ...
Loading ...