Loading ...
Loading ...
Loading ...
Sensi Smart Thermostat | MANUAL OPERATION GUIDE 4
Switching System Mode
Press the “Mode” button to switch between all available system mode settings. When
the Mode is “Off” the thermostat will not bring on your heating or cooling systems.
Fan Mode
If you want to circulate the indoor blower, you can switch Fan to “On.” Turn the
Fan back to “Auto” when you want the thermostat to control your indoor blower
as necessary. Leaving the Fan in “On” will run your blower continuously.
Holding One Temperature
If you want to hold one temperature, turn Schedule “Off.” Then, adjust the
set point using the up and down arrow buttons. The thermostat will hold
this temperature, in the set Mode, until you turn Schedule back “On” or until
you adjust the set point again using the up and down arrow buttons.
Temporary Hold
When your schedule is set to “On,” your Sensi thermostat controls your home based on
the time and temperature settings in the current schedule. To temporarily change your
temperature use the up and down arrows in the app or on the thermostat. Your Sensi
thermostat will display “Temporarily Set To” on the thermostat and will hold your new
temperature until the next scheduled set point with a minimum hold time of two hours.
BASIC FUNCTIONALITY
Loading ...
Loading ...
Loading ...