Loading ...
Loading ...
Loading ...
The firmware upgrade method depends on the current firmware and boot loader
versions on your switch.
10.
If the page displays the Enter Loader Mode button, click the Enter Loader Mode
button.
The switch reboots and enters into the loader mode. The Firmware Upgrade page
that displays varies, depending on the firmware boot loader version that is already
on your switch.
11.
Click the Browse button and locate and select the firmware image that you
downloaded and unzipped.
12. Click the Apply button.
WARNING: To avoid the risk of corrupting the firmware, do not interrupt the
upgrade. For example, do not turn off the switch or disconnect it.
When the upgrade is complete, your switch restarts, and the device UI uses the
language of the firmware that you installed. The upgrade process typically takes
about three minutes.
Register the switch
Registering your switch allows you to receive email alerts and streamlines the technical
support process. You can register your switch through the device UI.
To register your switch through the device UI:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection.
Note: You must access the switch while connected to the network (on-network) to
register the switch.
2. Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the switch using a web
browser on page 17.
The login window opens.
4. Enter the switch password.
The password is the one that you specified the first time that you logged in. The
password is case-sensitive.
User Manual26Get Started
Gigabit Ethernet Plus Switches
Loading ...
Loading ...
Loading ...