Loading ...
Loading ...
Loading ...
ES
BR
Nenhum indicador luminoso.
➔ Verique a tomada, o conector, a voltagem e o fusível. Caso tenha problemas, ligue para o Nespresso Club.
Sem café, sem água.
➔ O reservatório de água está vazio. Encha o reservatório de água.
➔ Descalcique, se necessário; consulte a seção de Descalcicação.
O café sai muito lentamente.
➔A velocidade do uxo depende da variedade do café.
➔ Descalcique, se necessário; consulte a seção de Descalcicação.
Não há café, sai apenas água (apesar de a cápsula ter sido inserida).
➔ Caso tenha problemas, envie o aparelho para reparos ou ligue para o Nespresso Club.
O café não está sucientemente quente.
➔ Pré-aqueça a xícara.
➔Descalcique, se necessário; consulte a seção de Descalcicação.
A área da cápsula está vazando (água no recipiente coletor de cápsulas
usadas).
➔ Posicione a cápsula corretamente. Se ocorrerem vazamentos, ligue para o Nespresso Club.
Os botões piscam irregularmente.
➔ Envie o aparelho para reparo ou ligue para o Nespresso Club.
Todos os botões piscam simultaneamente por 10 segundos e, em
seguida, a máquina se desliga automaticamente.
➔ Alarme de erro, a máquina precisa de reparo. Envie o aparelho para reparo ou ligue para o Nespresso Club.
Todos os 6 botões piscam rapidamente 3 vezes e, então, a máquina volta
para o modo pronto.
➔ O reservatório de água está vazio.
Os alertas de descalcicação e limpeza piscam.
➔ A máquina está no modo de menu. Pressione os botões Lungo e de espuma de leite por 3 segundos para sair
do modo de menu ou aguarde 30 segundos para sair automaticamente.
O alerta de descalcicação acende em laranja, e os botões de bebidas
tornam-se disponíveis (alerta de descalcicação nível 1).
➔ A máquina aciona um alerta de descalcicação de acordo com o consumo de bebidas. Descalcique a
máquina.
O alerta de descalcicação pisca em laranja, e os botões de bebidas
tornam-se disponíveis (alerta de descalcicação nível 2).
➔ O processo de descalcicação não foi executado corretamente. Descalcique a máquina.
O alerta de descalcicação pisca em laranja, e o botão de espuma de leite
quente se acende.
➔ A máquina está no modo de descalcicação. Pressione o botão de leite quente para iniciar o processo de
descalcicação.
O alerta de descalcicação acende em laranja, e os botões de bebidas
tornam-se indisponíveis (alerta de descalcicação nível 3).
➔ A máquina foi bloqueada devido a um nível muito alto de calcicação. Descalcique a máquina.
O alerta de limpeza pisca em laranja.
➔ Enxágue o sistema de preparo de leite.
Todos os botões de café e de receita à base de leite piscam
alternadamente.
➔ Superaquecimento da máquina, aguarde até que a máquina esfrie.
➔ O aparelho será bloqueado por aproximadamente 10 minutos após o esvaziamento.
Não é possível abaixar completamente a alavanca.
➔ Esvazie o recipiente coletor de cápsulas usadas. Verique se alguma cápsula está presa dentro do recipiente
coletor de cápsulas usadas.
A qualidade da espuma de leite não está à altura do padrão esperado.
➔ Use leite desnatado ou semidesnatado à temperatura da geladeira (cerca de 4 °C).
➔ Enxágue após cada preparo de receita à base de leite (consulte a seção Lavagem manual do Sistema Rápido
para Cappuccino.
➔ Descalcique a máquina (consulte a página 47).
➔ Não use leite congelado.
Não consigo entrar no modo de menu.
➔ Certique-se de remover o reservatório para leite.
➔ Certique-se de pressionar os botões Lungo e de espuma de leite por 3 segundos.
➔ Remova o tubo de descalcicação.
SOLUÇÃO DE PROBLEMAS
ESPECIFICACIONES/
ESPECIFICAÇÕES
LATTISSIMA TOUCH
EUR,AUS,NZ: 220240 V, 50/60 Hz, 1300 W
US/CA: 120 V, 60 Hz, 1200 W
19 bar
6.5 kg
1,38 litre
500 ml
13-16 capsules
l=19,4 cm . L=33,2 cm . h=27,4 cm
Troubleshooting
Contact the Nespressso Club
For any additional information, in case of problems
or simply to seek advise, call the Nespresso Club.
Contact details of the Nespresso Club can be found
in the 'Welcome to Nespresso' folder in your
machine box or at nespresso.com
No light on display
Check the mains, plug, voltage, and fuse. In case of problems, call the Nespresso Club.
Coffee comes out very slowly.
Flow speed depends on the coffee variety.
Perform a self check of the machine. Enter the menu list and select Maintenance. Follow instruction
Coffee is not hot enough.
Preheat cup.
Perform a self check of the machine. Enter the menu list and select Maintenance. Follow instruction
Capsule area is leaking (water in capsule container).
Position capsule correctly. If leakages occur, call the Nespresso Club.
Irregular blinking.
Send appliance to repair or call the Nespresso Club.
No coffee, just water runs out (despite inserted capsule).
In case of problems, call the Nespresso Club.
Lever cannot be closed completely
Empty capsule container. Make sure that no capsule is blocked inside the capsule container.
Quality of milk froth is not up to standard
1) For a perfect milk froth, use skimmed or semi-skimmed milk at refrigerator temperature (about 4° C)
2) Rinse after each milk based preparation. Place a recipient under milk outlet, rotate the milk
regulator knob until “CLEAN” position.
3) Every two days, disassemble the R. C. S. and clean all components in the upper level of a
dishwasher
Warranty
Delonghi warrants this product against defects in materials and workmanship for a period of two years from the date of purchase. During this period, Delonghi will either repair or
replace, at its discretion, any defective product at no charge to the owner. Replacement products or repaired parts will be guaranteed for only the unexpired portion of the original
warranty or six months, whichever is greater. This limited warranty does not apply to any defect resulting from accident, misuse, improper maintenance, or normal wear and tear. Any
defect resulting from the usage of non genuine Nespresso capsules will not be covered by this warranty. Except to the extent allowed by applicable law, the terms of this limited warranty
do not exclude, restrict
or modify, and are in addition to, the mandatory statutory rights applicable to the sale of the product to you. If you believe your product is defective, contact Nespresso for instructions on
where to send or bring it for repair. Please visit our website at nespresso.com to discover more about Nespresso
Specifications
P
max
Once the rinsing process is finished, the
machine switches off. Clean the machine
using a damp cloth. You have now finished
descaling the machine.
9
10
11 12
Rinsing process Rinse and fill water with
fresh potable water up to MAX level.
Rinsing process Place one container of
minimum 1 litre under both the coffee
outlet and the hot water spout.
PRESS to confirm.
The rinsing cycle continues trough the coffee
outlet, hot water spout and drip tray until the
water tank is empty.
Water hardness setting
1
programmed buttons blinks 3 times: water hardness is set
i
1”
2 3 4
1
2
3
4
5
Place the water hardness sticker under
water for 1 second.
The number of red squares indicates
the water harness level.
Set the value accordinglyEnter the menu, browse the options and select
WATER HARDNESS.
You will be guided to set the value.
Follow machine display instructions.
max
max
Kg
11 12
CL/AR: 220-240 V,
50-60 Hz, 1400 W
MX: 127 V~, 60 Hz, 1 350 W
BR: 127 V, 60 Hz, 1350 W
BR: 220 V, 60 Hz, 1300 W
CO: 120 V, 60 Hz, 1350 W
EUR,AUS,NZ: 220240 V, 50/60 Hz, 1300 W
US/CA: 120 V, 60 Hz, 1200 W
19 bar
6.5 kg
1,38 litre
500 ml
13-16 capsules
l=19,4 cm . L=33,2 cm . h=27,4 cm
Troubleshooting
Contact the Nespressso Club
For any additional information, in case of problems
or simply to seek advise, call the Nespresso Club.
Contact details of the Nespresso Club can be found
in the 'Welcome to Nespresso' folder in your
machine box or at nespresso.com
No light on display
Check the mains, plug, voltage, and fuse. In case of problems, call the Nespresso Club.
Coffee comes out very slowly.
Flow speed depends on the coffee variety.
Perform a self check of the machine. Enter the menu list and select Maintenance. Follow instruction
Coffee is not hot enough.
Preheat cup.
Perform a self check of the machine. Enter the menu list and select Maintenance. Follow instruction
Capsule area is leaking (water in capsule container).
Position capsule correctly. If leakages occur, call the Nespresso Club.
Irregular blinking.
Send appliance to repair or call the Nespresso Club.
No coffee, just water runs out (despite inserted capsule).
In case of problems, call the Nespresso Club.
Lever cannot be closed completely
Empty capsule container. Make sure that no capsule is blocked inside the capsule container.
Quality of milk froth is not up to standard
1) For a perfect milk froth, use skimmed or semi-skimmed milk at refrigerator temperature (about 4° C)
2) Rinse after each milk based preparation. Place a recipient under milk outlet, rotate the milk
regulator knob until “CLEAN” position.
3) Every two days, disassemble the R. C. S. and clean all components in the upper level of a
dishwasher
Warranty
Delonghi warrants this product against defects in materials and workmanship for a period of two years from the date of purchase. During this period, Delonghi will either repair or
replace, at its discretion, any defective product at no charge to the owner. Replacement products or repaired parts will be guaranteed for only the unexpired portion of the original
warranty or six months, whichever is greater. This limited warranty does not apply to any defect resulting from accident, misuse, improper maintenance, or normal wear and tear. Any
defect resulting from the usage of non genuine Nespresso capsules will not be covered by this warranty. Except to the extent allowed by applicable law, the terms of this limited warranty
do not exclude, restrict
or modify, and are in addition to, the mandatory statutory rights applicable to the sale of the product to you. If you believe your product is defective, contact Nespresso for instructions on
where to send or bring it for repair. Please visit our website at nespresso.com to discover more about Nespresso
Specifications
P
max
Once the rinsing process is finished, the
machine switches off. Clean the machine
using a damp cloth. You have now finished
descaling the machine.
9
10
11 12
Rinsing process Rinse and fill water with
fresh potable water up to MAX level.
Rinsing process Place one container of
minimum 1 litre under both the coffee
outlet and the hot water spout.
PRESS to confirm.
The rinsing cycle continues trough the coffee
outlet, hot water spout and drip tray until the
water tank is empty.
Water hardness setting
1
programmed buttons blinks 3 times: water hardness is set
i
1”
2 3 4
1
2
3
4
5
Place the water hardness sticker under
water for 1 second.
The number of red squares indicates
the water harness level.
Set the value accordinglyEnter the menu, browse the options and select
WATER HARDNESS.
You will be guided to set the value.
Follow machine display instructions.
max
max
Kg
11 12
Max/Max. 19 bar
EUR,AUS,NZ: 220240 V, 50/60 Hz, 1300 W
US/CA: 120 V, 60 Hz, 1200 W
19 bar
6.5 kg
1,38 litre
500 ml
13-16 capsules
l=19,4 cm . L=33,2 cm . h=27,4 cm
Troubleshooting
Contact the Nespressso Club
For any additional information, in case of problems
or simply to seek advise, call the Nespresso Club.
Contact details of the Nespresso Club can be found
in the 'Welcome to Nespresso' folder in your
machine box or at nespresso.com
No light on display
Check the mains, plug, voltage, and fuse. In case of problems, call the Nespresso Club.
Coffee comes out very slowly.
Flow speed depends on the coffee variety.
Perform a self check of the machine. Enter the menu list and select Maintenance. Follow instruction
Coffee is not hot enough.
Preheat cup.
Perform a self check of the machine. Enter the menu list and select Maintenance. Follow instruction
Capsule area is leaking (water in capsule container).
Position capsule correctly. If leakages occur, call the Nespresso Club.
Irregular blinking.
Send appliance to repair or call the Nespresso Club.
No coffee, just water runs out (despite inserted capsule).
In case of problems, call the Nespresso Club.
Lever cannot be closed completely
Empty capsule container. Make sure that no capsule is blocked inside the capsule container.
Quality of milk froth is not up to standard
1) For a perfect milk froth, use skimmed or semi-skimmed milk at refrigerator temperature (about 4° C)
2) Rinse after each milk based preparation. Place a recipient under milk outlet, rotate the milk
regulator knob until “CLEAN” position.
3) Every two days, disassemble the R. C. S. and clean all components in the upper level of a
dishwasher
Warranty
Delonghi warrants this product against defects in materials and workmanship for a period of two years from the date of purchase. During this period, Delonghi will either repair or
replace, at its discretion, any defective product at no charge to the owner. Replacement products or repaired parts will be guaranteed for only the unexpired portion of the original
warranty or six months, whichever is greater. This limited warranty does not apply to any defect resulting from accident, misuse, improper maintenance, or normal wear and tear. Any
defect resulting from the usage of non genuine Nespresso capsules will not be covered by this warranty. Except to the extent allowed by applicable law, the terms of this limited warranty
do not exclude, restrict
or modify, and are in addition to, the mandatory statutory rights applicable to the sale of the product to you. If you believe your product is defective, contact Nespresso for instructions on
where to send or bring it for repair. Please visit our website at nespresso.com to discover more about Nespresso
Specifications
P
max
Once the rinsing process is finished, the
machine switches off. Clean the machine
using a damp cloth. You have now finished
descaling the machine.
9
10
11 12
Rinsing process Rinse and fill water with
fresh potable water up to MAX level.
Rinsing process Place one container of
minimum 1 litre under both the coffee
outlet and the hot water spout.
PRESS to confirm.
The rinsing cycle continues trough the coffee
outlet, hot water spout and drip tray until the
water tank is empty.
Water hardness setting
1
programmed buttons blinks 3 times: water hardness is set
i
1”
2 3 4
1
2
3
4
5
Place the water hardness sticker under
water for 1 second.
The number of red squares indicates
the water harness level.
Set the value accordinglyEnter the menu, browse the options and select
WATER HARDNESS.
You will be guided to set the value.
Follow machine display instructions.
max
max
Kg
11 12
aprox. 4.5 kg (2.20 lbs)
0.9 l/Litre (30.43 oz)
0.35 l/Litre (11.83 oz)
6.8 in 10.16 in
17.3 cm 25.8 cm
12.6 in
32 cm
53
UM_LATTISSIMA_TOUCH_FACELIFT_Z1A.indb 53 17.10.17 15:52
Loading ...
Loading ...
Loading ...