Loading ...
Loading ...
Loading ...
5
1. SELECT BLOWER OPTION AND INSTALLATION TYPE
8” ROUND DUCT
ROOF CAP
24” TO 36”
ABOVE COOKING SURFACE
WALL CAP
HOOD
DECORATIVE
FLUE
OR SOFFIT
6”
OR
12”
HH0205A
HOOD
DECORATIVE
FLUE
OR SOFFIT
10” ROUND DUCT
ROOF
CAP
HH0206A
24” TO 36” ABOVE
COOKING SURFACE
WALL
CAP
6”
OR
12”
MODEL iQ6, P3 OR P6
SINGLE INTERIOR BLOWER
TYPICAL DUCTWORK
MODEL iQ12 OR P12
DUAL INTERIOR BLOWER
TYPICAL DUCTWORK
EXTERIOR BLOWER
EXTERIOR
BLOWER
DECORATIVE FLUE
OR SOFFIT
HH0207A
24” TO 36” ABOVE
COOKING SURFACE
10” ROUND DUCT
HOOD
6”
OR
12”
HH0208A
IN-LINE BLOWER
10” ROUND DUCT
(
EXCEPT HLB3, 8” ROUND DUCT)
24” TO 36” ABOVE
COOKING SURFACE
ROOF CAP
WALL
CAP
HOOD
MODEL EB6, EB9, EB12 OR EB15
EXTERIOR BLOWER TYPICAL DUCTWORK
MODEL ILB3, ILB6, ILB9 OR ILB11
IN-LINE BLOWER TYPICAL DUCTWORK
1.1 NON-DUCTED INSTALLATION
For a non-ducted installation, we recommend using interior blower Best model iQ6, P3 or P6 for effectiveness. (Blower sold
separately.)
The non-duct kit ANKWP Series (sold separately) must be installed. This kit fits hood from 30-inch width up to 48-inch width. See
installation instructions included with the non-duct kit ANKWP Series.
1.2 DUCTED INSTALLATION
For a ducted installation, either an interior or exterior blower or in-line blower may be used with this hood. The Best WP29M Series
must be installed with blower models iQ6, P3, P6, iQ12, P12, ILB3, ILB6, ILB9, ILB11, EB6, EB9, EB12 or EB15 only.
Other blowers cannot be substituted. (Blowers sold separately.)
Plan where and how the ductwork will be installed.
If installing in-line blower, refer to instructions packed with in-line blower and follow steps 1 up to 8, 11, 12, 15 and up of this
manual.
Install proper-sized ductwork, elbows and roof or wall cap for the type of blower you are installing. Use metal duct tape to seal duct
joints.
NOTE: It is recommended that there be a minimum of 6” of straight duct from this hood to an elbow for 8” ducting and 12” for 10” ducting.
Loading ...
Loading ...
Loading ...