Snow Joe SJ619E-RM User Manual

Loading ...

Discharge Chute Assembly

1. Position the chute deector over the discharge chute and

align the holes, placing the washer between the deector

and the chute (Fig. 10).

2. Secure the carriage bolts and knobs. Make sure the knobs

are tightened (Fig. 11).

3. Turn the crank knob clockwise to ensure the discharge

chute and deector are in position.

Operation

NOTE: Before using this machine, make sure that the power

source you will use complies with the specications detailed

in this manual. Before inserting the plug into the socket, verify

that the snow thrower’s auger and rubber plates are rmly

secured, and that the rubber plates are facing the correct

direction. Perform a test run to ensure that the rotor turns

freely.

Securing the Extension Cord

1. For safe and ecient use of your snow thrower, use only

a UL-rated extension cord recommended for outdoor use.

Refer to the Extension Cord Chart on page 2.

2. Push a loop of the extension cord through the slot on the

cord lock from the opposite side of the restraint hook.

Position the loop over the hook and pull the cable back

through the slot (Fig. 12).

3. Insert the female end of the extension cord into the

appliance's polarized male plug (Fig. 13).

Fig. 10

Deectorknob

Washer

Carriage bolt

Fig. 11

Fig. 12

Extension

cord

Slot

Fig. 13

Appliance

cord

Extension cord

Loading ...

Snow Joe SJ619E-RM Electric Single Stage Snow Thrower 18-Inch 14.5 Amp Motor LED Lights Certified Refurbished