Loading ...
Loading ...
Loading ...
10
4. Note that the snow thrower has a polarized male plug –
one prong in the plug is slightly longer and wider than the
other (Fig. 14). The extension cord female end should be
likewise polarized so that the extension cord ts snugly
into the appliance plug.
PoweringOn+O
mWARNING! The auger starts rotating immediately
after the snow thrower is switched on. Keep hands
and feet away from the auger.
1. To switch the snow thrower ON, press the safety switch
button, then squeeze the switch bar lever (Fig. 15).
2. Once the snow thrower starts, release the safety switch
button and proceed with operation.
3. To power OFF, release the switch bar lever.
Utilizing the LED Light
1. To utilize the LED light for nighttime snow removal,
activate the LED light switch located on the switch bar
harness (Fig. 16).
NOTE: After you have nished using your snow thrower,
remember to turn OFF the light switch.
2. The LED light can be adjusted by moving it up and down
as depicted (Fig. 17).
Moving the Machine + Plowing
the Snow
Fig. 14
m WARNING m
Damagedelectricalcordspresentriskofre,
electrical shock, and serious bodily injury.
Before operating the snow thrower, carefully examine
the electrical cord. If the cord is damaged, do not use
the snow thrower. Replace or repair the damaged
cord immediately. If you need assistance, contact an
authorized Snow Joe
®
+ Sun Joe
®
service center.
Fig. 15
Safety switch
button
Switch bar
lever
Fig. 16
LED light switch
Fig. 17
m WARNING m
Foreign objects, such as rocks, broken glass, nails, wire,
or string, can be picked up and thrown by the snow
thrower, causing serious personal injury.
Remove all foreign objects from the area to be plowed
before operating the snow thrower.
Loading ...
Loading ...
Loading ...