Loading ...
Loading ...
Loading ...
2
Follow these precautions when handling the drive or discs.
• Please take notice that the manufacturer of this equipment does not offer any
warranty against data loss due to inappropriate installation or handling, or direct
or indirect damages.
• Please take notice that the manufacturer will bear no responsibility for direct or
indirect damages caused by the use of this product or its malfunction.
• Please take notice that the manufacturer will bear no responsibility for damage to
data caused by this product.
• Please backup (copy) all important data as a protection against data loss.
• Avoid placing the drive in a location subject to:
- high humidity, high temperature, excessive dust, mechanical vibration,
direct sunlight
We recommend using the drive in a horizontal or vertical position.
Do not use it in tilted position.
• Don’t move the drive suddenly from a cold place to a warm one or raise the room
temperature suddenly. Condensation may occur, causing abnormal operation.
•
Make sure to remove the disc before moving the drive. The disc may become dam-
aged, causing data loss.
• Be careful to prevent foreign objects, such as liquids or metal, from entering the
drive. In case a foreign object enters the drive, please consult the dealer where
the drive was purchased.
• Don’t interrupt the electric power while the drive is operating.
• When connecting two IDE devices to the Primary or Secondary connectors, make
sure that the two devices are not configured as both Master, or both Slave.
If they are both set the same, Windows may fail to run or recognize the drives.
• The total length of the IDE cable should be no more than 18 inches
(about 45 cm).
Important Precautions
Loading ...
Loading ...
Loading ...