Loading ...
Loading ...
Loading ...
Servicing Your Honda 77
Clutch System
3. Insert the clutch lifter rod (9) into the
mainshaft.
4. Install the clutch lifter (10) onto the rod.
5. Install the clutch pressure plate (11).
6. Install the six clutch springs and bolts (12).
7. Tighten the bolts in a crisscross pattern in two
or three steps to the specified torque:
9 lbf·ft (12 N·m, 1.2 kgf·m)
8. Apply engine oil to a new O-ring (13) and
install it in the groove of the clutch cover (14).
9. Install the cover by tightening the six cover
bolts in a crisscross pattern in two or three
steps to the specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
10. Install the engine oil fill cap/dipstick
(page 63).
(9) clutch lifter rod (10) clutch lifter
(11) clutch pressure plate
(12) clutch springs and bolts
(9)
(10)
(11)
(12)
(13) O-ring (new)
(14) clutch cover
(13)
(14)
31MKE610_RX.book 77 ページ ２０１７年４月１４日 金曜日 午後２時３７分
Loading ...
Loading ...
Loading ...