Loading ...
Loading ...
Loading ...
u Do not push the brake pedal while the
wheel is removed.
Installation
1.
To install the rear wheel, reverse the
removal procedure.
u Take care to prevent the brake caliper
from scratching the wheel during
installation.
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.
2.
Make sure that the lug on the brake
caliper bracket is positioned in the slot on
the swingarm.
3.
Adjust the drive chain slack. 2 P. 69
4.
Install and tighten the rear axle nut.
Torque: 65 lbf·ft (88 N·m, 9.0 kgf·m)
u
Failure to provide adequate
disc-to-caliper holder clearance may
damage the brake discs and impair
braking efficiency.
20170919102656_31MGW6600_enu_BOOK Page 92 Tuesday, September 19 2017 10:33:26 JST
Tire Puncture u Removing Wheels
Troubleshooting
89
Continued
Lug
Slot
Swingarm
Loading ...
Loading ...
Loading ...