Loading ...
Loading ...
Loading ...
Removing & Installing Body Components
Battery
#
Removal
Make sure the ignition switch is in the OFF position.
1.
Remove the left side cover. 2 P. 52
2.
Open the battery compartment cover.
3.
Remove the bolts and remove the battery
holder.
4.
Disconnect the negative - terminal from
the battery.
5.
Disconnect the positive + terminal from
the battery.
6.
Remove the battery taking care not to
drop the terminal nuts.
#
Installation
Install the parts in the reverse order of
removal. Always connect the positive
+
terminal first. Make sure that bolts and nuts
are tight.
For proper handling of the battery, see
“Maintenance Fundamentals.” 2 P. 40
“Battery Goes Dead.” 2 P. 91
20170919102656_31MGW6600_enu_BOOK Page 52 Tuesday, September 19 2017 10:33:26 JST
Maintenance
49
Negative
terminal
Positive
terminal
Bolts
Battery
Battery
holder
Compartment cover
Loading ...
Loading ...
Loading ...