Subaru 2022 Impreza Car

User Manual - Page 264

For 2022 IMPREZA .

PDF File Manual, 536 pages, Read Online | Download pdf file

2022 IMPREZA  photo
Loading ...
Loading ...
Loading ...
(262,1)
北米Model "A3230BE-A" EDITED: 2021/ 5/ 19
! Erasing HomeLink Buttons
S03AP110805
1. Press any of the left, center or right
buttons to select the main menu. Select
“HOMELINK” using the center switch and
press the left switch.
2. Select the “CLEAR BUTTON” using
the center button and press the left button.
3. Select the HomeLink button that you
would like to erase the program on the
display using the center button. Then
press the left button.
4. To erase the program for the HomeLink
button, select “YES” using the center
button and press the left button.
HomeLink is now ready to be programmed
at any time beginning with “Programming a
new HomeLink button” - step 1.
! Reprogramming a Single
HomeLink Button
S03AP110806
To program a previously programmed
HomeLink button refer to “Programming
a New HomeLink button” FP257.
! Garage Door Two-Way Commu-
nication
S03AP110807
HomeLink has the capability of commu-
nicating with your garage door opener.
HomeLink can receive and display “clos-
ing” or “opening” status messages from
compatible garage door opener systems.
At any time, HomeLink can also recall and
display the last recorded status commu-
nicated by the garage door opener to
indicate your garage door being “closed”
or “opened”.
HomeLink has the capability of receiving
this communication from the garage door
opener at a range up to 820 feet (250 m).
Range may be reduced by obstacles such
as houses or trees. You may have to slow
your vehicle speed to successfully receive
the garage door opener communication.
! Programming Two-Way Commu-
nication
S03AP110808
1) Status Indicators
Within five seconds after programming a
new HomeLink button, both of HomeLink’s
garage door status indicators will flash
rapidly green indicating that the garage
door two-way communication has been
enabled. If your garage door status in-
dicators flashed, two-way communication
programming is complete.
If the garage door status indicators do not
flash, additional HomeLink information
and programming videos can be found
online at www.HomeLink.com/Subaru and
www.youtube.com/HomeLinkGentex.
Mirrors
260
Loading ...
Loading ...
Loading ...