Loading ...
Loading ...
Loading ...
(140,1)
北米Model "A3230BE-A" EDITED: 2021/ 5/ 19
2. Press and hold the “ ” button of the
power locking switch and insert the key
into the ignition switch and pull it out at
least 6 times within 10 seconds.
3. Open and close the driver’s door once
within 10 seconds. The hazard warning
flashers flash 3 times to indicate comple-
tion of the setting.
Your SUBARU dealer can perform the
above procedure for you. Also, for models
with a combination meter display, the
setting can be changed using the display.
For details, refer to “Menu screens”
FP200.
& Replacing the battery
S02AQ12
Refer to “Replacing key battery” FP480.
& Replacing lost transmitters
S02AQ13
If you lose a transmitter or want to
purchase additional transmitters (up to
four can be programmed), your transmit-
ters should be reprogrammed for security
reasons. For details, contact your
SUBARU dealer and have the transmitters
programmed into the remote keyless entry
system.
& Certification for remote key-
less entry system
S02AQ18
! U.S.-spec. models
S02AQ1801
FCC ID: CWTB1G077
FCC ID: CWTD1G141
CAUTION
FCC WARNING
Changes or modifications not ex-
pressly approved by the party re-
sponsible for compliance could void
the user’s authority to operate the
equipment.
NOTE
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This de-
vice may not cause harmful interfer-
ence, and (2) this device must accept
any interference received, including
interference that may cause undesired
operation.
! Canada-spec. models
S02AQ1802
Remote keyless entry system
138
Loading ...
Loading ...
Loading ...