Loading ...
Loading ...
Loading ...
l
If a non-rewireable plug is cut
off it must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
l
This appliance conforms to EC
Regulation 1935/2004 on materials
and articles intended to come into
contact with food.
before using for the first time
1 Wrap any excess cord around the
bracket h on the underside of the
powerbase.
2 Fill to ‘MAX’, boil, then pour the
water away. Repeat 2 to 3 times.
key
a spout
b finger pad
c flip top lid
d lid release button
e on/off switch with indicator light
f water level gauge
g 360° powerbase
h cord wrap
i filter
to use your kettle
1 Press the lid release button d to
open the lid, then fill the kettle. The
water level must be between ‘MAX’
and 1 cup (250mls).
l
If you live in a hard water area we
recommend that you use filtered
water in order to maintain the
appearance and efficiency of your
kettle.
l
Be economical: do not boil more
water than you need.
l
To improve the quality of your drinks
always use fresh water.
l
Empty the kettle after each use.
2 Close the lid by pushing down on
the finger pad area 1.
3 Plug in and switch on.
4 Your kettle will boil and switch off
automatically. To re-boil, wait a few
seconds - the on/off switch needs
time to reset.
Note - To interrupt the boiling
ensure that the switch is
in the off position before
removing from the powerbase.
l
If you experience problems
with your kettle switching
on and off during use or
switching off before boiling,
check that the flat element
is free from scale - see
“descaling”.
l
Your kettle is fitted with a filter to
hold back limescale particles.
l
If you find drops of water under
your kettle, don’t worry - it is just
condensation.
boil-dry protection
l
If you switch on with too little water,
your kettle will cut out automatically.
Switch off, remove from the
powerbase and let it cool down
before re-filling. When it has cooled
down, the switch will reset itself.
care and cleaning
l
Before cleaning, unplug your kettle
and let it cool down.
the outside and powerbase
l
Wipe with a damp cloth, then
dry. Do not use abrasives - they
will scratch the metal and plastic
surfaces.
the inside
l
Wipe with bicarbonate of soda on a
damp cloth. Rinse thoroughly.
l
Even though your kettle comes with
a filter, you still need to clean the
inside (and the filter) regularly.
the filter
1 Open the lid.
2 Lift the filter out away from the spout
area 2.
3 either rinse under the tap or use a
soft brush or when descaling your
kettle, drop the filter in too. Rinse
thoroughly.
4 Place the filter back in the spout
area and push down to secure 3.
4
Loading ...
Loading ...
Loading ...