PACKAGE CONTENTS
Before using your new product, please read these instructions to prevent any damage.
Play & Charge Kit
for Xbox One®
QUICK SETUP GUIDE
RF-XB1CHRGPKS
Flat size (W×H): 210 × 100 mm.
Front
Back
Final folded size: 70 × 100 mm.
ONE-YEAR LIMITED WARRANTY
Visit www.rocketshproducts.com for details.
CONTACT ROCKETFISH:
For customer service, call 1-800-620-2790 (U.S. )
www.rocketshproducts.com
Microsoft and Xbox One are registered trademarks of the Microsoft group of companies.
ROCKETFISH is a trademark of Best Buy and its afliated companies. Registered in some countries.
Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richeld, MN 55423 U.S.A.,
©2020 Best Buy. All rights reserved.
Made in China
SPECIFICATIONS
Battery capacity
Battery type
External dimensions
(W×H×D)
Operating temperature
1200mAh
Cable length 9 ft
Ni-MH LSD battery
Approx. 1.96 × 1.18 × .59 in.
(5 × 3 × 1.5 cm)
32°F~104°F (0°C~40°C)
• Rechargeable battery pack
• USB charge cable (10 feet)
• Quick Setup Guide
SETTING UP YOUR PLAY AND CHARGE KIT
1
2 Plug the USB Charge Cable (Micro USB plug) into the Xbox® One
controller.
3
Plug the USB Charge Cable (USB plug) into one of the open USB ports
on the console.
Note: You can also charge your battery by connecting the controller
and charge cable to any USB power source.
Open the battery cover and insert the rechargeable battery pack into
the battery compartment as shown below. The contacts should be
facing left and the diagonal stripes should be facing outward. Replace
the battery cover.
The rechargeable battery pack doesn’t charge?
- Conrm the battery pack is properly installed on the Xbox One controller.
- Please only use the included rechargeable battery pack or replacement rechargeable battery pack
(Model: RF-XB1SRBP-sold separately),other regular rechargeable batteries don't recharge in the
controller.
- Conrm the controller is connected to a powered USB port, and the charge cable is attached
securely at both ends, if charging via the USB port from Xbox One console, please make sure turn
the power ON before charging.
- The Play & Charge Kit uses a standard USB to micro-USB cable, You can use any standard USB to
micro-USB cable to test whether the cable is the problem.
TROUBLESHOOTING
SAFETY INFORMATION/CAUTION
Incorrect battery use may result in battery leakage, overheating, or explosion.
When using batteries, make sure that you follow these instructions:
• Keep batteries out of the reach of children.
• Do not heat, open, puncture, mutilate, or dispose of batteries in fire.
• If a battery leaks, remove the battery, taking care to keep the leaked
uid from touching your skin or clothes. If uid from the battery comes
into contact with skin or clothes, ush skin with water or remove the
clothing immediately. Before inserting a new battery, thoroughly clean
the controller with a damp paper towel.
• Do not allow metal objects to touch the battery terminals, because they
can become hot and cause burns. For example, do not carry the battery
in a pocket with keys or coins.
• Remove the battery when the product will not be used for an extended
period of time.
LEGAL NOTICES
FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Warning
compliance could void the user’s authority to operate the equipment.
: Changes or modications to this unit not expressly approved by the party responsible for
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/TV technician for help.
ICES-003 Statement
This Class B digital apparatus complies with Canadian ICES-3(B) / NMB-3(B) standard.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
television reception, which can be determined by turning the equipment o and on, the user is