Loading ...
Loading ...
Loading ...
To cook in Recipe mode:
1. Open the One Top
app and tap the bar at
the bottom of the screen.
2. Follow the steps to connect your One Top.
3. Select a recipe and tap Cook with One
Top
®
at the bottom of the screen. Follow
the on-screen prompts and step-by-
step instructions. One Top
®
will adjust
temperature and cooking time to precisely
match the recipe selected, and notify you
when your dish is perfectly cooked.
4. To cancel Recipe mode at any time, tap the
Power button on One Top
®
to turn it off, or
tap the power button at the bottom of the
screen.
CLEANING
CLEANING THE TEMPERATURE PROBE
WARNING: Temperature probe may be hot to
the touch.
Allow the temperature probe to cool before
cleaning. To clean, wipe the probe with a damp
cloth or sponge and use mild soap. Do not put
the probe in the dishwasher or immerse in water.
Make sure the probe connector is completely dry
before plugging it into One Top
®
unit.
CLEANING THE COOKTOP GLASS
WARNING: Do not touch hot surfaces.
Turn Cook Top off and allow to cool before
cleaning. To clean, wipe cooktop glass with a
damp cloth or sponge and use mild soap. You
can also use ceramic cooktop cleaner and follow
instructions on the packaging.
METAL MARKS AND SCRATCHES
Remove marks from sliding cookware on top of
glass with ceramic cooktop cleaner. If you allow
pots with a thin overlay of aluminum or copper
to boil dry, they may leave a black discoloration
on the cooktop. Clean before heating again or it
may become permanent. Check pots and pans
for roughness that could scratch One Top before
using.
NOTE: If pitting or indentation in the
glass has already occurred, contact
DAMAGE FROM SUGARY SPILLS
AND MELTED PLASTIC
Take special care when removing hot substances
from One Top
®
to avoid permanent damage to
the glass surface. Unless removed while still hot,
sugary spillovers (such as jellies, fudge, candy,
and syrups) or melted plastics can cause pitting
of the surface of your One Top
®
(not covered by
warranty). When cleaning, be sure to use a new,
sharp razor scraper. Do not use a dull or nicked
blade.
To clean sugary spills and melted plastic:
1. Remove pot or pan. Turn One Top
®
off.
WARNING: Do not touch hot surfaces. While
wearing an oven mitt:
a. Use a single-edge razor blade
scraper to move the spill to a cool
area on cooktop.
b. Remove the spill with paper towels.
2. Leave any remaining spillover on the surface
until cooktop is cool.
3. Do not use One Top
®
again until you remove
all of the residue completely.
NOTE: If pitting or indentation in the glass surface
has already occurred, the cooktop glass must
be replaced. Contact goodfulonetopsupport@
cuisinart.com
BURNED-ON RESIDUE
NOTE: Damage to your glass surface may
occur if you use scrub pads other than ones
recommended for ceramic cooktops.
To clean burned-on residue:
Allow One Top
®
to cool. Use ceramic cooktop
cleaner and follow instructions on the packaging.
To clean heavy, burned-on residue:
Use a single-edge razor blade scraper at 45°
angle against the glass surface, applying
pressure to scrape and remove the residue.
After you remove residue, use ceramic cooktop
cleaner and follow instructions on the packaging.
9
Loading ...
Loading ...
Loading ...