Loading ...
Loading ...
Loading ...
Page 6 of 8 P/N 11857.00 Rev A
NOTE: 4-1/4” Tall Starting Transition is Included with the Hood.
Transition dimensions may very. Before assembling transitions to hood, fit them into
the prepared cabinet opening to be sure the openings are large enough to accommodate
the transition. Enlarge the hole if required
Attach the transition (See DUCTING, pg 1), supplied with hood as described previously
in this instruction.
4-1/4"
14-1/4"
10-3/8"
Transition # 33895
INSTALLATION and USE & CARE INSTRUCTIONS
BAFFLE FILTER KIT
INSTALLER:
Please leave these Installation Instructions with unit for the owner.
1. You are now ready to install the baffle filters. Remove all packaging and the protective plastic covering
from the filters.
2. Grasp the filter by the center baffle, see FIG-11, with the spring end facing you and the grease collector
channel facing down and toward the rear of the hood. Position the spring end of the filter into the upper
channel of the front escutcheon, compress the spring by pulling the filter toward you and rotate the rear of
the filter up and into the rear retaining recess formed by the rear escutcheon and retaining clip.
Release the filter, being sure it is positioned properly in the channels. You should be able to push up and pull
down on the filter without having it come out of position. You can bend the spring slightly outward if the
filter is not pressing securely against the rear escutcheon.
3. The filter has an integral grease collector and is dishwasher safe. To clean your filter simply grasp the filter
by its center baffle, pull toward the front of the hood and rotate the rear of the filter down and away from the
hood, see FIG-12.
4. For best dishwasher results, position the filters in the dishwasher rack with the baffles positioned
horizontally.
1
2
3
Wrong
Position
In Upper
Channel
Rotate UP & Into
Retaining recess
Spring
Grease
Collector
Channel
Pull
Rotate Down
Pull
1
3
2
Remove Filter
Fig - 11
Fig - 12
Loading ...
Loading ...
Loading ...